Datasheet

2 x (0.5 - 1.5)
Terminal screw   PH1
Tightening torque for terminal screw  Nm 0.9
Contacts/switching capacity
Rated impulse withstand voltage U
imp
V AC 4000
Rated insulation voltage U
i
V 400
Overvoltage category/pollution degree   III/3
Rated operational current I
e
A 
AC-15   
24 V I
e
A 6
220 V 230 V 240 V I
e
A 6
380 V 400 V 415 V I
e
A 4
DC-13   
24 V I
e
A 3
110 V I
e
A 0.8
220 V I
e
A 0.3
Supply frequency  Hz max. 400
Short-circuit rating to IEC/EN 60947-5-1   
max. fuse  A gG/gL 6
Repetition accuracy  mm 0.02
Rated conditional short-circuit current  kA 1
Mechanical variables
Lifespan, mechanical Operations
x 10
6
1
Mechanical shock resistance (half-sinusoidal shock, 20 ms)   
Standard-action contact  g 10
Operating frequency Operations/h  ≦ 800
Actuation
Mechanical   
Actuating force at beginning/end of stroke  N 25/15 (plug-in/pull-out)
Mechanical holding force acc. to GS-ET-19 (04/2004)   
XG, XW, XNG  N 1700
XWA, XFG, XF  N 1600
XNW  N 1200
Electromechanical   
For magnet   
Power consumption   
at 120 V AC  VA 8
at 230 V AC  VA 11
at 24 V DC  W 8
Pick-up and drop-out values  x U
s
0.85 - 1.1
Magnet duty factor  % ED 100
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 6
Heat dissipation per pole, current-dependent P
vid
W 0.13
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 40
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
02/07/2019 Eaton 106823 ED2019 V52.0 EN 2 / 5