Datasheet

10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Sensors (EG000026) / End switch (EC000030)
Electric engineering, automation, process control engineering / Binary sensor technology, safety-related sensor technology / Position switch / Position switch (Type 1)
(ecl@ss10.0.1-27-27-06-01 [AGZ382015])
Width sensor  mm 60
Diameter sensor  mm 0
Height of sensor  mm 173
Length of sensor  mm 39
Rated operation current Ie at AC-15, 24 V  A 6
Rated operation current Ie at AC-15, 125 V  A 6
Rated operation current Ie at AC-15, 230 V  A 6
Rated operation current Ie at DC-13, 24 V  A 3
Rated operation current Ie at DC-13, 125 V  A 0.8
Rated operation current Ie at DC-13, 230 V  A 0.3
Switching function   Slow-action switch
Switching function latching   No
Output electronic   No
Forced opening   Yes
Number of safety auxiliary contacts   2
Number of contacts as normally closed contact   2
Number of contacts as normally open contact   0
Number of contacts as change-over contact   0
Type of interface   None
Type of interface for safety communication   None
Construction type housing   Cuboid
Material housing   Plastic
Coating housing   Other
Type of control element   Other
Alignment of the control element   Other
Type of electric connection   Other
With status indication   No
Suitable for safety functions   Yes
02/07/2019 Eaton 106823 ED2019 V52.0 EN 3 / 5