Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—June 2015 www.eaton.com V7-T1-121
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5
Pushbuttons and Indicating Lights
22.5 mm Modular Pushbuttons—M22
Palm Switches
ASi Adapter Modules
Description Momentary Maintained FAK-R-V-KC11-I
General
Standards IEC/EN 60947
VDE 0660
IEC/EN 60947
VDE 0660
IEC/EN 60947
VDE 0660
Lifespan, mechanical Operations x 10
6
>1 >0.1 >0.1
Operating frequency Operations/h
>
3600
>
600
>
600
Actuating force n 20–40 40–60 15–25
Operating torque Nm — — —
Degree of protection, IEC/EN 60529 IP IP67, IP69K IP67, IP69K IP65
UL Type 4X, 13 4X, 13 4X, 13
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature, operating °F (°C) –73 to 104 (–25 to 40) –73 to 104 (–25 to 40) –73 to 104 (–25 to 40)
Mounting position As required
Mechanical shock resistance to
IEC 60068-2-27
shock duration 11 ms, half-sinusoidal
g >15 >15 >15
Description M22-ASI M22-ASI-C
General
Standards IEC/EN 60947,
DIN EN 50295
IEC/EN 60947,
DIN EN 50295
Radio interference suppression EN 55011,
EN 55022
EN 55011,
EN 55022
Limit value class — —
Protection type IP20 IP00
Climatic proofing Damp heat, constant, to IEC 60068-2-78, cyclical, to IEC 60068-2-30
Ambient temperature, operating °F (°C) –13 to 131 (–25 to 55) –13 to 131 (–25 to 55)
Shock resistance shock duration 11 ms g >30 >30
Vibration to IEC 60068-2-27
(amplitude 1 mm)
Hz — —
Dimensions mm — —
Weight kg — —
Mounting Front mounting Front mounting
Mounting position As required As required
Power Supply
Rated voltage to AS-interface
specification
Vdc 26.5–31.6 26.5–31.6
Connection technique Yellow plug-in terminal as insulation
piercing terminal
Two cables onboard
Power supply Completely from the AS-interface cable
Addressing Via connection to AS-interface cable
Total power consumption of
the AS-interface
mA
>
40
>
40
AS-interface — —
Rated operational current at full load mA — —
Rated operational current when idle
(no I, O set)
mA — —
Status LEDs POWER AS-interface cable:
green LED on the rear side of the element
ERROR AS-interface, AS-interface master
failure: red LED on the rear side of the element
POWER AS-interface cable:
green LED on the board
ERROR AS-interface, AS-interface master
failure: red LED on the board