Cut Sheet

V7-T1-212 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—June 2015 www.eaton.com
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.8
Pushbuttons and Indicating Lights
30.5 mm Heavy-Duty Watertight/Oiltight—10250T
Key Removal Positions
Note: Key removal in “spring
return from” positions not
recommended.
Replacement Keys or Dissimilar
Locks for Key Operators
Operators listed on Page
V7-T1-212 have identical
locks and keys (Key Code
H661) Catalog Number
10250ED824. For dissimilar
lock and key combinations,
see listing on this page.
Replacement Key
Selector Switch Operators with
Dissimilar Locks and Keys
(UL [NEMA] 4, 4X and 13)
The locks in all key operators
listed on Pages V7-T1-191,
V7-T1-212 and V7-T1-349 are
identical and use key code
number H661. Two keys are
supplied with every lock. For
additional code number H661
keys, order Catalog Number
10250ED824. For others,
order 10250ED1130 and
designate lock number.
When dissimilar locks for
each operator or each group
of operators are required,
select from the lock and key
combination listed below.
When Ordering Operator
Only or a complete control
unit with a substitute lock,
order from table below and
add “except Lock and Key
Code No. …”
“H” Series Locks without
Master Key—with Key Slot
Cover
“M” Series Locks with
Master Key—with Key Slot
Cover
Master Keys for Above
Locks
Selector Switch Operators with Caps
UL (NEMA) Type 3, 3R, 4, 4X, 12, 13
Selector Switch Operators with Caps
Notes
1
Black knob selector switch, cam 1 shown.
2
M = Maintained. S = Spring return in direction of arrow (R).
3
Field convertible to horizontal mounting or order operator only and separate operator cap.
4
For selection of the proper cam and contact block to obtain the proper circuit sequence, see selection instructions and
tables on Pages V7-T1-208, V7-T1-209 and V7-T1-210.
5
Black lever selector switch, cam 3 shown.
Code
Suffix
Key Removal
Position
1 Right only
2 Left only
3 Right and left
4 Center only
5 Right and center
6 Left and center
7 All positions
L
C
R
Description Catalog Number
Replacement keys
(code H661)
10250ED824
Lock and Key Code Numbers
H501 H635 H663
H620 H639 H675
H621 H643 H683
H634 H654 H688
Lock and Key Code Numbers
MD1 MD14 ME8 MJ6
MD2 MD15 ME11 MJ10
MD3 MD16 ME16 MJ11
MD4 MD19 ME17 MJ13
MD5 MD20 ME18 MJ15
MD7 ME2 ME19 MJ16
MD9 ME3 MJ1 MD17
MD10 ME5 MJ3
MD11 ME6 MJ4
MD13 ME7 MJ5
Application Catalog Number
For code:
MD1–MD20 10250ED825-3
ME2–ME18 10250ED825-4
MJ1–MJ16 10250ED825-5
Positions Operator Action
2
Black Knob Selector Switch—
Vertical Mounting
3
Black Lever Selector Switch—
Vertical Mounting
3
Cam Code
4
Catalog Number Cam Code
4
Catalog Number
Two-position—60° throw 1 10250T1311 1 10250T3011
1 10250T1371 1 10250T3071
Three-position—60° throw 2 10250T1322 2 10250T3022
3 10250T1323 3 10250T3023
2 10250T1332 2 10250T3032
3 10250T1333 3 10250T3033
2 10250T1342 2 10250T3042
3 10250T1343 3 10250T3043
2 10250T1352 2 10250T3052
3 10250T1353 3 10250T3053
Four-position—40° throw 7 10250T1367 7 10250T3067
Two-Position
Maintained
1
Three-Position
Maintained
5
MM
MS
MM
M
MS
M
SS
M
MS
M
M
M
M
M