Cut Sheet

V7-T1-228 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—June 2015 www.eaton.com
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.8
Pushbuttons and Indicating Lights
30.5 mm Heavy-Duty Watertight/Oiltight—10250T
Accessories, continued
Note
1
Not suitable for single contact block depth cast enclosure. Cover is too thick.
Description Catalog Number
Special Operators and Attachments
Wobble Stick
Complete with retaining nut—fits standard button.
10250TA5
Lever Operator
For use with two vertically mounted flush pushbuttons.
10250TA14
Maintained Contact Attachment Release Button Assembly
1
Mechanically interlocks with another pushbutton and contact block (not included).
Provides mode indication. Minimum hole centers 1.62 in (41.1 mm), maximum
2.313 in (58.8 mm).
Black 10250TA17
Red 10250TA18
Green 10250TA19
Yellow 10250TA20
Same with Long Button—Black 10250TA39
Maintained Contact Attachment
1
Mechanically interlocks two buttons and provides position indication for one.
Use with two pushbutton operators and one or more contact blocks.
10250TA1
Roto-Push Lever Operator—
Used to provide lever operation for Roto-Push operators.
10250TA13
Special Light Modules
Master Test (Dual Input) Module—
Internal Form C relay suitable for either AC or DC applications. Total electrical isolation
between monitored and test circuit. Fits all illuminated 10250T, E22, E30 and E34 devices.
48 Vdc 10250TMT8
Flasher Module—
Changes any AC illuminated device to a controlled flashing light.
Fits 10250T, E30 and E34 devices.
24V 10250TFL2
120V 10250TFL1
Flashing Incandescent Lamp—
For use with 120V transformer type or 6V full voltage type indicating lights including
PresTest and most E29 devices.
10250ED986-4
10250TA5
10250TA14
10250TA_
10250TA1
10250TA13
10250TA79
10250TFL_
10250ED986-4