Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—March 2014 www.eaton.com V7-T2-41
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.2
Stacklights
E26 Series
Technical Data and Specifications
General Specifications
Description Specification
Mechanical Ratings
Shock (IEC 68-2-27) 11 ms, 15g
Vibration (IEC 68-2-6) 10 sweeps 10–150 Hz, 2g
Bump (IEC 68-2-29) 1000 pulses, 6 ms, 15g
Climate Conditions
Operating Maximum 104°F (40°C) at 95% RH,
Temperature –4° to 140°F (–20° to 60°C)
Storage Temperature –40° to 176°F (–40° to 80°C)
Materials
Cover Polycarbonate
Lenses Polycarbonate
Stacklight base Nylon
Extension tubes Aluminum
Mounting base Zinc die cast
Te r m i n a l s
Single conductor 14–30 AWG (2.5–0.05 mm
2
)
Two conductors (same size)) 18–26 AWG (0.75–0.14 mm
2
)
Do not mix solid and stranded wire in the same terminal
Recommended tightening torque 4.4–5.3 lb-in (0.5–0.6 Nm)
Electrical Ratings
Insulation voltage (U
i
)690V
Operational voltage (U
e
)250V
Impulse withstand voltage (U
imp
) 1.5 kV
Bulb Specifications
Incandescent lamp type BA15d
Maximum lamp wattage 6W
Bulbs—average life
Incandescent 7,000 to 12,000 hrs. (based on voltage)
Xenon flasher 20,000 hrs.
LED 60,000 to 100,000 hrs. (based on colors)
LED/Incandescent Comparison
Incandescent lamps Average operating life of 7,000 hours
Each lamp can be used with any color lens
Low cost results in short term savings
LED lamps Average operating life of 60,000 to 100,000 hours
Low power consumption
Extended life results in long-term savings