Cut Sheet

V7-T3-142 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.7
Control Relays and Timers
Machine Tool Relays
D15 Series—Freedom 600 V Multipole
Contents
Description Page
D15 Series—Freedom 600 V Multipole
Product Selection . . . . . . . . . . . . . . . . . . . . . . . V7-T3-143
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . V7-T3-144
Technical Data and Specifications . . . . . . . . . . V7-T3-145
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . V7-T3-146
BF/BFD Series—Fixed Contact
Industrial Control . . . . . . . . . . . . . . . . . . . . . . . . . V7-T3-147
AR/ARD Series—Convertible Contact
Industrial Control . . . . . . . . . . . . . . . . . . . . . . . . . V7-T3-153
D26 Series—Type M, 600 Vac Multipole
with Convertible Contacts . . . . . . . . . . . . . . . . . V7-T3-158
D26 Series—Type M, DC Multipole
with Convertible Contacts . . . . . . . . . . . . . . . . . V7-T3-163
D15 Series—Freedom 600 V Multipole
Product Description
Contact poles on the D15
relay are of the fixed design
and are not convertible. The
basic four-pole relay will
accept a front-mounted
contact pole deck and/or side-
mounted contact blocks (one
per side). In addition, a side-
mounted solid-state timer or
a front-mounted pneumatic
timer can be added to the
relay. Only one front-
mounted attachment can be
added to the basic relay.
Application Description
Side-mounted contact
blocks can be used to
provide additional poles
in applications where a
pneumatic timer is installed
on the front of the relay.
They can also be used where
panel depth is restricted.
The maximum number of
contacts recommended per
relay is eight, six of which can
be NC. When a pneumatic
timer is used, the maximum
recommended number of
NC contacts is three.
Relays with DC coils are
supplied with a coil clearing
NC contact mounted on the
side of the relay.
Features and Benefits
●
600 V, 10 A continuous
thermal current
●
State indicator visually
shows relay ON or OFF
status
●
Relay base has mounting
holes on 35 x 60 mm
centers, permitting direct
replacement of
competitive relays
●
Relay also mounts on
35 mm DIN rail as standard
●
Magnet coil has three
terminals, permitting either
top or diagonal wiring—
easy to replace European
or U.S. relays without
changing wiring layout
●
Contact pole terminals
have captive, backed-out,
self-lifting pressure plates
with ± screws—reduced
wiring time
●
All terminals are shrouded
or
“finger-proofed” to
reduce possibility
of
electrical shock
Standards and Certifications
●
UL
●
CSA certified