Cut Sheet

V7-T3-160 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.7
Control Relays and Timers
Machine Tool Relays
Relay Component Parts Location
Relay with Pneumatic Timer Attachment
Factory Installed (without Relay Contacts)
The relays listed above will
accept up to four catalog
number D26MPR contacts
(convertible—NO or NC) for
instantaneous operation.
Order contacts separately.
For additional information
on timer attachment, see
Page V7-T3-161.
For assembly of relays from
component parts and relay
accessories, see components
tables below.
Separate Contacts
Contact
Positions
1
Timer
Operation
Catalog
Number
2
4ON delayD26MR005
4 OFF delay D26MR006
D26MB
Relay Base
Assembly
D26MF
Front Attachment
Timer Attachments or
Mechanical Latch
D26MD10
Front Deck
Pneumatic Timer or
Mechanical Latch
D26MF
Front Attachment
Description
Catalog
Number
Convertible Contacts
Rear pole—NO D26MPR
Rear pole—NC D26MPR02
Front pole—NO D26MPF
Front pole—NC D26MPF02
Gold plated
(for low power circuits)
Rear pole—NO D26MPR03
Front pole—NO D26MPF03
Non-Convertible Contacts
Rear pole NO early closing
3
D26MPS
Rear pole NC late opening
3
D26MPL
Rear Pole
Front Pole
Relay Base Assembly (without Poles)
Basic four-pole D26 relay
without contacts. Provision
for adding one to four poles
as needed, D26MPR,
D26MPL and/or D26MPS
rear pole type.
Front Deck (Convertible Contact Poles)
Provides up to four additional
front pole type D26MPF
contacts. Convertible, NO
to NC.
Four-Pole Front Attachment
(4NO Fixed Circuit)
Can be added to any two- to
eight-pole Type M, D26 relay
to provide up to a 12-pole
relay. Four NO, non-
convertible contacts are
included in this assembly.
Notes
1
Number of available instantaneous contact positions (order contacts
separately—Catalog Number D26MPR).
2
Consult Customer Support Center for availability.
3
To obtain overlapping contacts, these two special poles must be used in related circuits.
4
Add magnet coil suffix letter, see Page V7-T3-159. Example: D26MBA.
Description
Catalog
Number
Relay base assembly D26MB
4
Relay Base
Assembly
Description
Catalog
Number
Front Deck with …
1NO contact pole D26MD10
2NO contact poles D26MD20
4NO contact poles D26MD40
Rear Pole
Description
Catalog
Number
Front attachment D26MF
Four-Pole Front
Attachment