Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com V7-T3-161
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.7
Control Relays and Timers
Machine Tool Relays
Relay State Indicating Light
Light provided with leads and
bracket for mounting on two-
to 12-pole relays. May be
used to monitor state
of magnet coil or relay
contact operation.
Pneumatic Timer Attachment
Attachment mounts on any 0-
to four-pole D26 relay without
latch. Timer unit has DPDT
timed contacts (circuits in
each pole must be the same
polarity). Adjustable timing
range—0.1 to 180 seconds,
repeat accuracy ±10%.
Units are convertible from
OFF delay to ON delay or
vice versa.
Mounting Channel
Pre-spaced mounting for
adjacent relay installation.
Indexed for cutting to desired
length. Captive mounting
screws provided in channel
for easier installation.
Technical Data and Specifications
General
Note
1
For DC contact ratings, see Page V7-T3-165.
Description
Catalog
Number
120 Vac, 50/60 Hz D26MAP120
240 Vac, 50/60 Hz D26MAP240
Relay State
Indicating Light
Description
Catalog
Number
ON delay D26MTE
OFF delay D26MTD
Pneumatic Timer
Attachment
Description
Catalog
Number
10 in length for 4 relays D26MC4
20 in length for 8 relays D26MC8
30 in length for 12 relays D26MC12
40 in length for 16 relays D26MC16
Mounting Channel
Contact Ratings (Amperes) A600
AC Volts
1
Make and
Emergency
Interrupting
Capacity Break
Continuous
Thermal Rating
120 60 6 10
240 30 3 10
480 15 1.5 10
600 12 1.2 10
Coil Power Operating Time
Watts VA
Range in
MillisecondsRelay Inrush Sealed Inrush Sealed
Two- to 12-pole 95.0 9 155 22 Pickup: 6–13
Latch coil 18.5 11 41 17 Dropout: 8–26
Manual Test Accessory
Tool to manually hold relays
in the energized position for
circuitry testing on completed
panel. (10 per box, order in
multiples of
10.)
Transient Suppressor
May be mounted on any
120 Vac relay magnet coil
or latch coil or 120 Vdc latch
coil—connects directly across
coil terminals. All DC magnet
coils have a built-in varistor
for transient suppression.
Limits high voltage transients
produced in the circuit when
power is removed from the
coil.
Description
Catalog
Number
Manual test accessory D26MTA
Manual Test Accessory
Description
Catalog
Number
Magnet coil transient suppressor D26MAS1
Latch coil transient suppressor D26MAS2
Transient Suppressor