Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—February 2014 www.eaton.com V7-T4-13
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4.1
PLC, I/O and Communications Products
ELC Series Programmable Logic Controllers
Analog Input and Output Modules (Right Side Bus)
Analog input/output modules uses voltage or current mode for any channel—see table
for resolution based on type and mode.
Temperature Input Modules (Right Side Bus)
Thermocouple and Platinum RTD temperature sensor input modules with 14 bit resolution.
Motion Control Module (Right Side Bus)
Single axis motion control module—up to 8 modules can be added to controllers.
If used with PH controller, it can provide a second axis since the PH controller has
a single axis built-in.
If used with the PV controller, it can provide a third axis since the PV incorporated
two axis of motion control and is capable of output pules up to 200 kHz
RS-485 Adapter Module (Right Side Bus—End Module)
Passive RS-485 connection device module.
RJ12 port for connecting to a drive.
2-pin screw terminal to connect to ELC controller.
Male and female DB9 connectors to connect to other RS-485 devices.
Toggle Switch Input Module (Right Side Bus)
8 input switch module for manual switch inputs to
the ELC controllers—used for debugging applications
or product training demonstrations
Description
Input
Points Resolution Mode
Output
Points Resolution Mode
Maximum
Current
Consumption
(at 24 Vdc)
Catalog
Number
4 Analog input module 4 V = 12 bit
I = 13 bit
±10V
±20 mA
—— — 90 mA ELC-AN04ANNN
2 Analog output module — — — 2 12 bit 0–20 mA; 4–20 mA
0–10V; 2–10V
125 mA ELC-AN02NANN
4 Analog output module — — — 2 12 bit 0–20 mA; 4–20 mA
0–10V; 2–10V
170 mA ELC-AN04NANN
6 Analog input/output
module
4 V = 12 bit
I = 11 bit
±10V
±20 mA
2 12 bit 0–20 mA
0–10V
170 mA ELC-AN06AANN
Description
Input
Points Resolution
Sensor
Ty pe
Maximum Current
Consumption
(at 24 Vdc)
Catalog
Number
4 Thermocouple input module 4 — J, K, R, S, T 90 mA ELC-TC04ANNN
4 Platinum RTD input module 4 14 bit PT100 90 mA ELC-PT04ANNN
Description
Input
Ty pe
Output
Type
Catalog
Number
Single axis motion control module Phase in, start, stop, and so on Phase, pulse, direction ELC-MC01
Description
Connector
Types
Catalog
Number
RS-485 Connect adapter module RJ12, DB9 (male and female), 2-pin screw terminals ELC-485APTR
Description
Maximum Current
Consumption
(at 24 Vdc)
Catalog
Number
8 Toggle switch input module 20 mA ELC-EX08NNSN
ELC-AN04ANNN
ELC-PT04ANNN
ELC-MC01
ELC-485APTR
ELC-EX08NNSN