Cut Sheet

V7-T4-76 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—February 2014 www.eaton.com
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4.5
PLC, I/O and Communications Products
XI/ON Series Remote I/O
Technical Data and Specifications
XI/ON General
Te r m i n a l s
Description Unit Specification
Standards EN 61000-6-2, EN 61000-6-4, EN 61131-2
Supported fieldbus systems PROFIBUS-DP, CANopen, DeviceNet, Modbus TCP, EtherNet/IP (depending
on gateway)
Potential isolation Yes, through optocoupler
Ambient temperature °F (°C) 32° to 131° (0° to 55°)
Ambient temperature, storage °F (°C) –13° to 185° (–25° to 85°)
Relative humidity % 5–95 (indoor), Level RH-2, noncondensing (for storage at 45°C)
Harmful gases
SO
2
ppm 10 (relative humidity <75%, noncondensing)
H
2
S ppm 1.0 (relative humidity <75%, noncondensing)
Vibration resistance, operating conditions According to IEC 60068-2-6
Mechanical shock resistance According to IEC 60068-2-27
Repetitive shock resistance According to IEC 60068-2-29
Drop and free fall According to IEC 60068-2-31, free fall to IEC 60068-2-32
Protection type IP20
Electromagnetic compatibility (EMC)
ESD EN 61000-4-2
Electromagnetic fields EN 61000-4-3
Burst EN 61000-4-4
Surge EN 61000-4-5
HF, asymmetric EN 61000-4-6
Radiated interference (RFI) EN 55016-2-3
Voltage fluctuations EN 61131-2
Type test To EN 61131-2
Approvals CE, cUL
Description Unit
XN Gateways and
XN Basic Modules
XNE Gateways and
Integrated XNE Modules
Dimensional data To VDE 0611 Part 1/8.92/
IEC/EN 60947-7-1
To VDE 0611 Part 1/8.92/
IEC/EN 60947-7-1
Connection from above Spring-loaded/screw terminals Push-in spring-cage terminals
Cable stripped length mm 8 8
Max. terminal capacity mm
2
0.5–2.5 0.14–1.5
Connectable conductors
“e” solid H07V-U mm
2
0.5–2.5 0.25–1.5
“f” flexible H 07V-K mm
2
0.5–1.5 0.25–1.5
“f” with ferrule without plastic collar
to DIN 46228-1 (ferrules gas-tight)
mm
2
0.5–1.5 0.25–1.5
“f” with ferrule with plastic collar
to DIN 46228-1 (ferrules gas-tight)
mm
2
0.5–1.5 0.25–0.75
Gauge pin IEC/EN 60947-1 A1 A1