Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—February 2014 www.eaton.com V7-T4-85
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4.5
PLC, I/O and Communications Products
XI/ON Series Remote I/O
Analog Output Modules
Note
1
Part of the XI/ON module’s electronics is supplied with module bus voltage (5 Vdc), the other part through the supply terminal (U
L
).
Description Unit XN-1AO-I(0/4…20MA) XN-2AO-I(0/4…20MA) XN-2AO-U(-10/0…+10VDC) XNE-4AO-U/I
Measured variables Current Current Voltage Voltage, current
Channels Number 1 2 2 4
Rated voltage at supply terminal (U
L
) Vdc 24 24 24 24
Rated current drawn from supply
terminal (I
L
)
1
mA
<
50
<
50
<
50
<
150
Rated current drawn from module
bus (I
MB
)
1
mA
<
39
<
40
<
43
<
40
Heat dissipation W Normally 1 Normally 1 Normally 1 <3
Output Value, Voltage
Output voltage Vdc –10 to 10 Vdc/0 to 10 Vdc –10 to 10 Vdc/0 to 10 Vdc
Value representation Standard, 16-bit/12-bit
(left-aligned)
Standard, 16-bit/12-bit (left-aligned)
Extended range, 16-bit/12-bit (left-aligned)
PA (NE43), 16-bit/12-bit (left-aligned)
The following can be connected: 2-conductor + shield 2-conductor
Load resistor
Resistive load ohm >1000 >1000
Capacitive load µF <1 <1
Transfer frequency Hz <100 <20
Recovery time
Resistive load ms <0.1 <1
Inductive load ms <0.5 <2
Capacitive load ms <0.5 <2
Short-circuit current mA
<
40
<
40
Basic error limit at 23°C % <0.2 <0.2
Temperature coefficient
<
300 ppm/°C of full-scale value
<
200 ppm/°C of full-scale value
Output Value, Current
Output current mA 0–20/4–20 0–20/4–20 0–20/4–20
Value representation Standard, 16-bit/12-bit
(left-aligned)
Standard, 16-bit/12-bit
(left-aligned)
Standard, 16-bit/12-bit (left-aligned)
Extended range, 16-bit/12-bit (left-aligned)
PA (NE43), 16-bit/12-bit (left-aligned)
The following can be connected: 2-conductor + shield 2-conductor + shield 2-conductor
Load resistor
Resistive load ohm <550 <450 <450
Inductive load H <1 <1 <1
Transfer frequency Hz <200 <200 <20
Recovery time
Resistive load ms <0.1 <2 <1
Inductive load ms <0.5 <2 <2
Capacitive load ms <0.5 <2
Short-circuit current mA
<
40
Basic error limit at 23°C % <0.2 <0.2 <0.2
Temperature coefficient
<
300 ppm/°C of
full-scale value
<
300 ppm/°C of
full-scale value
<
200 ppm/°C of
full-scale value
Basic modules
Without C connection XN-S3…-SBB XN-S3…-SBB XN-S3…-SBB Already built in