Cut Sheet
Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2014 www.eaton.com V7-T8-15
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8.1
Terminal Blocks, Fuse Blocks and Fuse Holders
IEC—XB Series
Accessories
Screw Connection Multi-Conductor Ground Blocks
Technical Data and Specifications
Screw Connection Multi-Conductor Ground Blocks
Dimensions
Approximate Dimensions in Inches (mm)
Screw Connection Multi-Connector Ground Blocks
Notes
1
For ordering information, see Page V7-T8-105.
2
For information on Printed Marking Tag Options, see Page V7-T8-98.
For additional accessories, see Page V7-T8-90.
Description Color
Number of
Positions
Standard
Pack
XBUT25D12PE XBUT4D12PE XBUT25D22PE XBUT4D22PE
Catalog
Number
Catalog
Number
Catalog
Number
Catalog
Number
End cover Gray — 10 XBACUT4D12 XBACUT4D12 XBACUT4D22 XBACUT4D22
End cover segment Gray — 10 XBASUT4 XBASUT4 XBASUT4 XBASUT4
Partition plate — — 10 XBATUTD12 XBATUTD12 XBATUTD22 XBATUTD22
Plug-in bridge—for cross
connections in the bridge shaft
Red 2 10 XBAFBS25 XBAFBS26 XBAFBS25 XBAFBS26
310XBAFBS35 XBAFBS36 XBAFBS35 XBAFBS36
510XBAFBS55 XBAFBS56 XBAFBS55 XBAFBS56
10 10 XBAFBS105 XBAFBS106 XBAFBS105 XBAFBS106
50 10 XBAFBS505 XBAFBS506 XBAFBS505 XBAFBS506
Test adapter — — 10 XBATSPAI4 XBATSPAI4 XBATSPAI4 XBATSPAI4
2.3 mm diameter test plug — — — XBATSMPS-_
1
XBATSMPS-_
1
XBATSMPS-_
1
XBATSMPS-_
1
Modular test plug — — 10 XBATSPS5 XBATSPS6 XBATSPS5 XBATSPS6
Blank marker strip (strip of 10) White — 10 XBMZB5
2
XBMZB6
2
XBMZB5
2
XBMZB6
2
Description XBUT25D12PE XBUT4D12PE XBUT25D22PE XBUT4D22PE
Technical Data in Accordance with IEC
Maximum load current in A/cross-section in mm
2
————
Rated surge voltage in kV/contamination class 6/3 6/3 6/3 6/3
Surge voltage category/insulating material group III/I III/I III/I III/I
Connection Capacity
Stranded with ferrule/with ferrule and
plastic sleeve in mm
2
0.25–2.5/0.25–2.5 0.25–4/0.25–4 0.25–2.5/0.25–2.5 0.25–4/0.25–4
Multi-Conductor Connection
(same cross-section)
Solid/stranded in mm
2
0.14–1.0/0.14–1.0 0.14–1.0/0.14–1.5 0.14–1.0/0.14–1.0 0.14–1.0/0.14–1.5
Stranded with ferrules without plastic sleeve in mm
2
0.25–1.0 0.25–1.5 0.25–1.0 0.25–1.5
Stranded with twin ferrule with plastic sleeve in mm
2
0.5–1.0 0.5–1.0 0.5–1 0.5–1
Stripping length in inches (mm) 0.31 (8) 0.31 (8) 0.31 (8) 0.31 (8)
Thread M3 M3 M3 M3
Torque in in-lb (Nm) 5.3–7.1 (0.6–0.8) 5.3–7.1 (0.6–0.8) 5.3–7.1 (0.6–0.8) 5.3–7.1 (0.6–0.8)
Catalog
Number Width Length
Cover
Width
Height for—
35 x 7.5 in 35 x 15 in
XBUT25D12PE 0.20 (5.2) 2.24 (56.8) 0.09 (2.2) 1.87 (47.5) 2.17 (55.0)
XBUT4D12PE 0.24 (6.2) 2.24 (56.8) 0.09 (2.2) 1.87 (47.5) 2.17 (55.0)
XBUT25D22PE 0.20 (5.2) 2.52 (64.1) 0.09 (2.2) 1.87 (47.5) 2.17 (55.0)
XBUT4D22PE 0.24 (6.2) 2.52 (64.1) 0.09 (2.2) 1.87 (47.5) 2.17 (55.0)