Cut Sheet

V7-T8-38 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2014 www.eaton.com
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8.1
Terminal Blocks, Fuse Blocks and Fuse Holders
IEC—XB Series
Accessories
Spring Cage Connection Single Level Ground Blocks, XBPT25PE, XBPT4PE and XBPT6PE
Spring Cage Connection Single Level Ground Blocks, XBPT10PE, XBPT16PE and XBPT35PE
Technical Data and Specifications
Spring Cage Connection Single Level Ground Blocks
Dimensions
Approximate Dimensions in Inches (mm)
Spring Cage Connection Single Level Ground Blocks
Notes
1
For information on Printed Marking Tag Options, see Page V7-T8-98.
2
XBPT35PE has an enclosed design. The use of an end cover is not required.
For additional accessories, see Page V7-T8-90.
Description Color
Number of
Positions
Standard
Pack
XBPT25PE XBPT4PE XBPT6PE
Catalog
Number
Catalog
Number
Catalog
Number
End cover Gray 10 XBACPT25 XBACPT4 XBACPT6
Blank marker strip external labeling White 10 XBMZBF5
1
XBMZBF6
1
XBMZBF8
1
Blank marker strip center labeling (strip of 10) White 10 XBMZB5
1
XBMZB6
1
XBMZB8
1
Description Color
Number of
Positions
Standard
Pack
XBPT10PE XBPT16PE XBPT35PE
Catalog
Number
Catalog
Number
Catalog
Number
End cover Gray 10 XBACPT10 XBACPT16
2
Plug-in bridge—for cross connections in
the bridge shaft
—2 10XBAFBS210 XBAFBS212 XBAFBS216
Blank marker strip external labeling White 10 XBMZBF10
1
XBMZBF12
1
XBMZBF15
1
Blank marker strip center labeling (strip of 10) White 10 XBMZB10
1
XBMZB12
1
XBMZB15
1
Description XBPT25PE XBPT4PE XBPT6PE XBPT10PE XBPT16PE XBPT35PE
Technical Data in Accordance with IEC
Maximum load current in A/cross-section in mm
2
———65/1690/25125/35
Rated surge voltage in kV/contamination class 8/3 8/3 8/3 8/3 8/3 8/3
Surge voltage category/insulating material group III/I III/I III/I III/I III/I III/I
Connection Capacity
Stranded with ferrule with plastic sleeve in mm
2
0.25–2.5 0.25–4 0.25–6 0.25–10 0.25–16 2.5–35
Stranded with ferrules without plastic sleeve in mm
2
0.25–2.5 0.25–4 0.25–6 0.25–10 0.25–16 2.5–35
Stranded with twin ferrule with plastic sleeve in mm
2
0.5 0.5–1 0.5–1.5 1.5–2.5 1.5–4 2.5–10
Stripping length in inches (mm) 0.39 (10) 0.39 (10) 0.47 (12) 0.71 (18) 0.71 (18) 0.98 (25)
Catalog
Number Width Length
Cover
Width
Height for—
35 x 7.5 in 35 x 15 in
XBPT25PE 0.20 (5.2) 1.91 (48.5) 0.09 (2.2) 1.45 (36.8) 1.73 (44.0)
XBPT4PE 0.24 (6.2) 2.20 (56.0) 0.09 (2.2) 1.45 (36.8) 1.73 (44.0)
XBPT6PE 0.32 (8.2) 2.74 (69.5) 0.09 (2.2) 1.71 (43.5) 2.01 (51.0)
XBPT10PE 0.39 (10.0) 2.81 (71.5) 0.09 (2.2) 1.99 (50.5) 2.28 (58.0)
XBPT16PE 0.47 (12.0) 3.15 (80.0) 0.09 (2.2) 2.01 (51.0) 2.30 (58.5)
XBPT35PE 0.63 (16.0) 3.94 (100.0) 2.32 (59.0) 2.62 (66.5)