Cut Sheet

V7-T8-58 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2014 www.eaton.com
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8.1
Terminal Blocks, Fuse Blocks and Fuse Holders
IEC—XB Series
Pluggable Spring Cage Terminal Blocks
Contents
Description Page
Pluggable Spring Cage Terminal Blocks
Connection Terminal Blocks . . . . . . . . . . . . . . . V7-T8-59
Connection Plugs . . . . . . . . . . . . . . . . . . . . . . . V7-T8-62
Connection Receptacles . . . . . . . . . . . . . . . . . V7-T8-64
Connection Accessories . . . . . . . . . . . . . . . . . V7-T8-66
Drawings
Online
Pluggable Spring Cage Terminal Blocks Overview
Product Description
The pluggable spring cage
connection terminal blocks
allow signal and power wiring
to be made pluggable. This
complete pluggable system
has a spring that provides
maximum connection space
in a space-saving design.
The pluggable system
accommodates stranded
conductors with a nominal
cross-section of 2.5 mm
2
,
with or without ferrules.
Application Description
For applications requiring
pluggable wiring up to a rated
current of 32A and a rated
voltage of 800V. The
integrated overspring meets
the most stringent vibration
requirements. Also ideal
where safety is a concern and
flexibility is required. The
basic terminal blocks and the
plugs are finger-safe, which
also means the supply
voltage can be input via either
the terminal blocks or the
plugs. With the XBAPSC
receptacles, plug-in contacts
can be accommodated safely
in cable ducts and distributor
shafts using minimal space.
A test hole can accommodate
a 2.3 mm diameter test plug
in each receptacle, providing
a practical solution. The
XBAPSP plugs are intended
for connecting one wire,
while the XBAPSPDB plugs
are designed to connect
two wires and provide an
optional bridge.
Features
●
Space-saving design
●
Powerful contact
●
Finger-safe
Pluggability
Standards and Certifications
●
UL recognized—File No.
E67464
●
CE approved
●
LVD
1
:
●
EN 60947-7-1
●
EN 60947-7-2
●
EN 60998-2-3
●
EN 60352-4/A1
●
ATEX approval
(Eex e applications)
Note
1
Not all standards apply to all terminal
blocks. Contact Eaton for details.