Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com V7-T9-15
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Connectivity Solutions
SmartWire-DT In-Panel and On-Machine Wiring Solution
System Connectivity Components
System connectivity components for the SmartWire-DT system includes cables, connectors, jumpers, bushings,
plugs, sockets, flat to round cable adapters, and crimping tools.
In-Cabinet Components
Description Length Pkg. Qty. Catalog Number
Flat Cable, 8 AWG 24, 600 V
For SmartWire-DT network inside the control panel 328.1 ft (100 m) 1 SWD4-100LF8-24
Complete with flat plugs SWD4-8MF2 installed at both ends 9.8 ft (3 m) 1 SWD4-3LF8-24-2S
16.4 ft (5 m) 1 SWD4-5LF8-24-2S
32.8 ft (10 m) 1 SWD4-10LF8-24-2S
Device Plugs
For connection to SmartWire-DT modules or nodes — 10 SWD4-8SF2-5
Flat Plugs
For connection to SmartWire-DT system components: gateways, powerfeed
modules, coupling and terminating resistor
—10SWD4-8MF2
Device Plug Jumpers
For bridging open, spare or inverted device plugs — 5 SWD4-SEL8-10
Control Station PCB Jumpers
For bridging open mounting locations on the control station printed
circuit board
—5M22-SWD-SEL8-10
Universal (Placeholder) Modules
Front mount — 20 M22-SWD-NOP
Base mount — 20 M22-SWD-NOPC
Flat Cable
SWD4-8SF2
SW
D4-8SF2
SWD4-8S
Device Plug
Flat Plug
Device Plug Jumper
PCB Jumper
Universal Modules
Front Mount Base Mount