Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com V7-T9-17
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Connectivity Solutions
SmartWire-DT In-Panel and On-Machine Wiring Solution
Motor Control Modules
Contents
Description Page
Motor Control Modules
Product Identification . . . . . . . . . . . . . . . . . . . . V7-T9-18
Contactor Modules . . . . . . . . . . . . . . . . . . . . . . V7-T9-19
Electronic Motor Starters . . . . . . . . . . . . . . . . . V7-T9-20
Soft Start Controllers . . . . . . . . . . . . . . . . . . . . V7-T9-21
Variable Speed Starters/
Variable Frequency Drives . . . . . . . . . . . . . . . V7-T9-22
Motor Control Modules
Product Description
Contactor modules fit onto
standard XT contactors and
control relays directly on top,
in place of a top mounted
auxiliary contact block. The
modules fit all XTCE size B
and C frame contactors and
XTRE control relays.
Soft Start Controllers,
Variable Speed Starters and
Variable Frequency Drives
connect to the SmartWire-DT
system with plug-in modules
similar to the approach with
Contactor Modules.
Electronic Motor Starters
with built-in SmartWire-DT
functionality connect directly
to the SmartWire-DT flat
cable without the need for a
supplemental module.
These modules facilitate
direct connection to the
SmartWire-DT flat cable and
eliminate the traditional
point-to-point wiring to the
PLC input and output
modules as well as wiring to
the contactor coils.
Features
●
Integrated 24 Vdc coil
power on network and
plug-in modules
●
Integrated switch position
polling and mechanical
switch position display on
contactor modules
●
Integrated feedback circuit
to PLC
●
Built-in diagnostic bi-color
LEDs on each module
●
Connection to SmartWire-DT
flat cable via quick
disconnect device plugs