Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com V7-T9-29
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Connectivity Solutions
SmartWire-DT In-Panel and On-Machine Wiring Solution
On-Machine Components
Contents
Description Page
On-Machine Components
Machine Mount I/O Modules . . . . . . . . . . . . . . V7-T9-30
I/O Splitters . . . . . . . . . . . . . . . . . . . . . . . . . . . V7-T9-30
Other I/O Connections . . . . . . . . . . . . . . . . . . . V7-T9-31
Machine Mount Powerfeed Modules . . . . . . . . V7-T9-31
Panel Transition Components . . . . . . . . . . . . . . V7-T9-32
SmartWire-DT Round Bus Cables . . . . . . . . . . V7-T9-32
Other System Components . . . . . . . . . . . . . . . V7-T9-33
On-Machine Components
Product Description
At the edge of the control
cabinet, the SmartWire-DT
system transitions from the
8-conductor flat cable to a
5-conductor round cable with
standard DC M12 barrel
connectors, using simple
transition adapters that
mount through the panel wall.
This round cable has five
conductors, uses standard
DC M12 barrel connectors,
and is 300 V rated. It is used
outside the control panel to
connect machine mount
(IP67) I/O modules to the
SmartWire-DT system for
use with peripherals such as
sensors, enclosed pushbuttons,
remote enclosed contactors,
pneumatic and hydraulic
valves, stacklights and other
remote devices. This single
cable is used both to provide
power to connected devices
and to carry I/O signals.
Digital machine-mountable
IP67 I/O modules are
connected as nodes on the
SmartWire-DT network and
allow standard or generic
devices to be connected to
the SmartWire-DT system.
They can be connected
anywhere around the
machine with up to 2000 ft
and 99 machine mount I/O
modules possible with a
single cable connection.
Features
●
Digital modules available in
single connector and dual
connector versions to size
exactly to your machine I/O
needs at a particular device
mounting location
●
Compatible with a wide
range of sensors and
actuators for easy
integration into any
machine design
●
Single-connector versions
with up to 2 I/O channels
and dual connector
versions with up to 4 I/O
channels using accessory
splitters
●
Versions with configurable
I/O channels to allow for
selection as input or output
in any combination
●
Integrated 24 Vdc power
and communications with
single 5-conductor cable
using standard DC M12
connectors
●
Complete Plug & Play
solution, integrated with
in-panel SmartWire-DT
wiring components
including auto-addressing
feature
●
Connection of up to 99
modules and up to 2000
feet of cable on a single
branch of the wiring
system
●
Built-in diagnostic bi-color
LEDs on each module
●
IP67 enclosure rating
●
Tool-free mounting options
●
Vertical and flat mounting
possible