Cut Sheet

V7-T9-30 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Connectivity Solutions
SmartWire-DT In-Panel and On-Machine Wiring Solution
Product Selection
Machine Mount I/O Modules
SmartWire-DT I/O modules for connection to most digital input and output devices.
I/O Splitters
To allow for use of both available channels on applicable digital input/output modules.
Description
Number of
Dedicated
Inputs
Number of
Dedicated
Outputs
Number of
Configurable
Input/Output
Channels Catalog Number
Two digital input channels
Messages: Status of the digital inputs 1 and 2
Commands: None
200 EU1E-SWD-2DX
Two configurable digital input/output channels
Messages: Status of the digital inputs 1 and/or 2 (if configured as inputs)
Commands: Actuation of outputs 1 and/or 2 (if configured as outputs)
002 EU1E-SWD-2DD
Four digital input channels
Messages: Status of the digital inputs 1, 2, 3 and 4
Commands: None
400 EU2E-SWD-4DX
Four configurable digital input/output channels
Messages: Status of the digital inputs 1 and/or 2 and/or 3 and/or 4 (if configured as inputs)
Commands: Actuation of outputs 1 and/or 2 and/or 3 and/or 4 (if configured as outputs)
004 EU2E-SWD-4DD
Description
Package
Quantity Catalog Number
Combines two devices into a single I/O connection point. Both device connections are 4-pin DC M12. Power is common
between devices, and the splitter module is wired to Pin 4 for each connected sensor, actuator or other device.
1 SWD4-SP-4124
Combines two devices into a single I/O connection point. Both device connections are 4-pin DC M12. Power is common
between devices, and the splitter module is wired to Pin 2 for each connected sensor, actuator or other device.
1 SWD4-SP-4122
Combines two devices into a single I/O connection point. Both device connections are 4-pin M8. Power is common
between devices, and the splitter module is wired to Pin 4 for each connected sensor, actuator or other device.
1 SWD4-SP-4084
Combines two devices into a single I/O connection point. Both device connections are 4-pin M8. Power is common
between devices, and the splitter module is wired to Pin 2 for each connected sensor, actuator or other device.
1 SWD4-SP-4082
Combines two devices into a single I/O connection point. Both device connections are 3-pin M8. Power is common
between devices, and the splitter module is wired to Pin 2 for each connected sensor, actuator or other device.
1 SWD4-SP-3084
EU1E-SWD_
EU2E-SWD_
SWD4-SP_