Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com V7-T9-35
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Connectivity Solutions
SmartWire-DT In-Panel and On-Machine Wiring Solution
Product Selection
M22 operators and indicating lights including momentary and maintained pushbuttons, pilot lights,
hand and key operated selector switches, and mushroom switches.
Enclosed M22 Pilot Device Examples
Enclosures
Sealed mounting enclosures for M22 devices. Receptacles in the next section
require M20 enclosure knockouts, which are present in all M22 enclosures
offered by Eaton but are most common in the enclosures listed in this section.
M12 Wiring Receptacles
Panel-mount M12 connector receptacles designed expressly for mounting in
M20 enclosure knockouts in sealed M22 mounting enclosures listed in the
previous section.
Assembly Instructions
1. Select pushbutton or pilot light operator and required contact blocks/light modules from
catalog Volume 7 Tab 1.
2. Select enclosure from above listing.
3. Select receptacle from above listing.
4. Mount receptacle in enclosure knockout.
5. Wire receptacle to contact blocks and/or light modules as follows:
a. To wire a pushbutton or other pilot device as an input to the SmartWire-DT system
1) The receptacle brown lead is wired to one side of the switch contact
2) The receptacle black, white or gray
1
lead is wired to the other side of the switch contact
b. To wire an indicating light or actuator as an output from the SmartWire-DT system
1) The receptacle blue lead is wired to one side of the actuator or pilot light contact
2) The receptacle black, white, or gray
1
lead is wired to the other side of the actuator
2) or pilot light contact
Note
1
SmartWire-DT machine mounted I/O modules (see Page V7-T9-30) are offered in versions with multiple input and output channels
per M12 connection point. In the receptacle wiring scheme, one channel is available on the black wire, the second channel is available
on the white wire, and a third channel (if available) is carried on the gray wire.
Pushbutton Double Pushbutton Selector Switch Key Selector Switch Palm Switch
Description Catalog Number
One-element enclosure M22-I1
Two-element enclosure M22-I2
Three-element enclosure M22-I3
Four-element enclosure M22-I4
Six-element enclosure M22-I6
Description Catalog Number
5-inch wiring leads, M20 front threads SWD4-PRM5-2-S
1-meter wiring leads, M20 front threads SWD4-PRM5-1-S
M22-I_
SWD4-PRM5-…