Cut Sheet

Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—July 2015 www.eaton.com V7-T9-41
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Connectivity Solutions
SmartWire-DT In-Panel and On-Machine Wiring Solution
Powerfeed Modules, continued
Note
1
If contactors with a total current consumption >0.7 A are connected, a Power Feeder module EU5C-SWD-PF2 has to be used.
Description Unit
EU5C-SWD-PF1-1
Powerfeed
EU5C-SWD-PF2-1
Powerfeed
Supply Voltage U
Pow
Supply voltage V 24 Vdc (–15%/+20%) 24 Vdc (–15%/+20%)
Input voltage ripple %
<
5
<
5
Siemens MPI, (optional) — Yes
Rated current (I)A0.7 0.7
Overload proof Yes Yes
Inrush current and duration A 12.5 A/6 ms 12.5 A/6 ms
Heat dissipation at 24 Vdc W 3.8 3.8
Potential isolation between U
Pow
and
15 V SmartWire-DT supply voltage
—Yes
Bridging voltage dips ms — 10
Repetition rate s — 1
Status indication (LED) No Yes
SmartWire-DT Supply Voltage
Rated operating voltage (U
e
) V 14.5 ±3% 14.5 ±3%
Max. current (I
max
)A0.7 0.7
Short-circuit proof No Yes
Connection Supply Voltages
Connection type Push in terminals Push in terminals
Solid mm
2
0.2–1.5 (AWG 24–16) 0.2–1.5 (AWG 24–16)
Flexible with ferrule mm
2
0.25–1.5 0.25–1.5
SmartWire-DT Network
Station type — —
Number of SmartWire-DT modes — —
Baud rates — —
Address allocation None None
Status indication (LED)
SmartWire-DT master Green Green
Configurations Red Red
Connections 2 x plug, 8-pole 2 x plug, 8-pole
Plug connectors Two flat plugs SWD4-8MF2 Two flat plugs SWD4-8MF2
Fieldbus Interface
Bus protocol — —
Baud rates — —
Address allocation — —
Station address — —
Address allocation — —
Status display fieldbus interface (LED) — —
Terminating resistor — —
Connection design for field bus — —
Potential isolation — —