Specification

For more information visit: www.cutler-hammer.eaton.com TD00502001E
Technical Data
Page 18 Effective: April 2002
Meter Breakers
Dimensions and Knockouts (Non-EUSERC Meter Breaker Design) — Dimensions in Inches (mm)
Figure 43. Knockouts for Non-EUSERC Units Catalog Numbers —
MB2040P200BTSD, MBB200BTS, MBP200BTS, MB816P200BTS,
MB816P200BTSCU, MB816B200BTS, MB816P200BTSD,
MB816B200BTSCU, MB816B200BTSD, MB2040P200BTS,
MB2040B200BTS, MBP200BTSD, MBP200SD, MB816P200STD,
MB816P200BTSCUD and MB2040P200SD
Table 22. Top Endwall (Surface)
1
Use when DS H1 Type 1, 1-1/4 and 1-1/2-inch hubs are needed.
Figure 44. Knockouts for Non-EUSERC Units Catalog Numbers —
CMB2424B200BTS, MBB150BTSCR, MBB200BTSCR, MBP200BTSCR,
MBB150BTSC and MBB200BTSC
Table 23. Bottom Endwall
Hub
Provision
DS100H2
DS125H2
DS150H2
DS200H2
DS250H2
DS300H2
DS900AP (Adapter Plate)
1
5-5/16
(134.9)
Top Surface
Bottom
4-15/16
(125.4)
Knockout Size
(Dimensions in Inches)
Quantity
5/16
1/2
1/2, 3/4
3/4, 1
1-1/4, 1-1/2, 2, 2-1/2
1-1/2, 2, 2-1/2, 3
3
3
2
1
2
1
Bottom
4-15/16
(125.4)
5-5/16
(134.9)
Top Surface (Catalog Numbers with SC and SCR Suffix Only)