Datasheet

ManualsBrandsEaton ManualsPressure SensorsPressure Switch G1/4

DATASHEET - MCS11-SOND910-G

Pressure switch, 2W gold-plated, 15bar

Part no. MCS11-SOND910-G

Catalog No. 087793

Eaton Catalog No. MCS11-SOND910-G



Delivery program

Note on use   This product complies with Low-Voltage Directive 2014/35/EC and EMC Directive

2014/30/EC and meets the requirements in EN 60947-5-1. This product does not

meet the rail industry's standard requirements. Accordingly, the user must review it

separately for the speciﬁc application at hand.

Product range   Pressure switches with auxiliary contacts

Degree of Protection   IP65

Contacts   2 changeover contact with gold-plated contacts

Cut-in pressure and cut-out pressure:

separate stepless adjustment.

All the intersection points within the diagram area can be set.

  

Min. switching diﬀerential: 0.3 bar

Example:

Cut-out pressure 8.5 bar

Cut-in pressure 4.5 bar

   Variable switching diﬀerential

Max. operating pressure  bar 15

Notes

Features:

• Pressure pipe ﬂange R¼”

• If required: pressure pipe ﬂange R½”

• IP65 in conjunction with V-M20 cable gland

• 2 cable entry knockouts for M20

• Neoprene membrane, resistant to aging, air, engine oil, and water min. -25 °C, max. +80 °C

Cut-in and cut-out pressures are factory-preset as speciﬁed with part no. suﬃx: ￫#203948

R¼” corresponds to G¼

R½” corresponds to G½ according to ISO 228-1

Auxiliary contact in accordance with IEC/EN 60947-5-1

Notes

Gold-plated contacts, particularly suitable for switching low voltages and currents from 5 V AC/DC 1 mA.

Technical data

General

Standards   IEC/EN 60947-5-1

Test pressure  bar 32

Rupturing pressure  bar 90

02/07/2019 Eaton 087793 ED2019 V52.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - MCS11-SOND910-G Pressure switch, 2W gold-plated, 15bar Part no. Catalog No. Eaton Catalog No. MCS11-SOND910-G 087793 MCS11-SOND910-G Delivery program Note on use This product complies with Low-Voltage Directive 2014/35/EC and EMC Directive 2014/30/EC and meets the requirements in EN 60947-5-1. This product does not meet the rail industry's standard requirements. Accordingly, the user must review it separately for the speciﬁc application at hand.
PAGE 2
Operating frequency Operations/h ≦ 1500 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature -25 - 70 Degree of Protection IP65 Mounting position As required Mechanical shock resistance to IEC 60068-2-27 Halfsinusoidal shock 20 ms g > 10 Vibration resistance acc. to IEC/EN 60068-2-6 Amplitude 1 mm Hz 36 lifespan Operations x 10 Terminal capacities 6 2 mm Solid mm Flexible with ferrules to DIN 46228 mm 2 1 x (0.75 - 2.
PAGE 3
Rated voltage Ue at AC 50 Hz V 0-0 Rated voltage Ue at AC 60 Hz V 0-0 Rated voltage Ue at DC V 0 - 110 Initial value measuring range pressure Pa 0 End value measuring range pressure Pa 0 Rated operation power at AC-3, 400 V kW 0 Switching capacity at AC-3, 240 V kA 0 Rated operation current Ie at AC-1, 400 V A 0 Rated operation current Ie at AC-3, 400 V A 0 Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as normally closed contact 0 Number
PAGE 4
Dimensions 02/07/2019 Eaton 087793 ED2019 V52.
PAGE 5
Additional product information (links) IL05212001Z (AWA1320-0132) Pressure switch IL05212001Z (AWA1320-0132) Pressure switch 02/07/2019 ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL05212001Z2018_05.pdf Eaton Industries GmbH http://www.eaton.eu © 01/2019 by Eaton Industries GmbH Eaton 087793 ED2019 V52.