User Manual

EATON Product Catalogue

Eaton MX

4/5/8/10/15/20 kVA

Double conversion (on-line)

High performance UPS upgradeable from 4 kVA to 20

kVA

Continuous power supply

• Two front access hot-swappables sub-modules (power

and battery) for maintenance without load interruption

• Automatic battery test (test period can be set)

• Internal bypass built-in to supply the load even if the UPS

fails

• Large input voltage and frequency ranges to avoid using

the batteries unnecessarily

Total flexibility

• Can be used as a free-standing tower unit or 19” rack-

mounted: only 3U for Eaton MX 4000 and 5000, 16U for

Eaton MX Frame

• LCD multilingual display with mimic and LEDs for rapid

view of the UPS status, diagnostics and event log

• Outputs: IEC 10A and 16A outlet sockets and hardwired

outputs.

• Built-in Powershare system for remote reboot of the

equipment connected, sequential start-up or load

shedding while operating from battery to maintain the

power to critical loads

• Eaton MX Frame is compatible with three phase or single

phase supplies

• Backup time: 10 mins up to 2 hours by adding 3U

battery extension modules

Minimum total cost of ownership (TCO)

• More power with an output power factor of 0.9

• When the power supply needs to be upgraded, the

Eaton MX 4000 and 5000 can be paralleled to provide 8

kVA or 10 kVA using the ModularEasy kit: without extra

cost on the initial purchase

• Eaton MX Frame is a modular system with 5 kVA sub-

modules paralleled to provide up to 20 kVA or 15 kVA

with redundancy

Eaton MX versatility

Pulsar Series

Advanced protection for:

• Departmental networks, servers and workstations

Eaton MX Frame

PAGE 1
Pulsar Series Eaton MX 4/5/8/10/15/20 kVA Minimum total cost of ownership (TCO) • More power with an output power factor of 0.
PAGE 2
Eaton MX UPS 4/5/8/10/15/20 kVA RJ45 EXB battery module detection 8 x IEC 10A sockets DB 9 with 5 output contacts Retention clips 2 x IEC 16A sockets DB 9 serial and USB ports Output circuit protection DB 15 for paralleling EXB battery extension module power connector 1 x minislot for NMC, Modbus/JBus or MC Contacts/Serial card Input RJ11 remote power off Eaton MX 4000/5000 Technical Specifications Output 4 000 5 000 MX Frame 15 000 MX Frame 20 000 4 kVA / 3.