Installation Manual

POW-R-WAY III Low Voltage Bus Plug
Installation Manual IM017010003E
Effective March 2005
New Information
●
THE POWER TO THE BUSWAY / BUS DUCT SHOULD BE
TURNED OFF TO ENSURE THAT THE INSTALLATION OF
THE BUS PLUG IS PERFORMED IN THE SAFEST MANNER
POSSIBLE.
●
PRIOR TO INSTALLING THIS BUS PLUG, INSPECT IT FOR
DAMAGE.
●
MAKE SURE THERE ARE NO MISSING PARTS.
●
SAFETY WHILE WORKING ON THIS EQUIPMENT MUST BE
EXERCISED.
●
THE HANDLE MUST BE IN THE OFF POSITION BEFORE
MOUNTING BUS PLUG INTO BUSWAY.
CAUTION
1. The handle can be placed on either side or end of the bus plug
(Figures 1 & 2) . On vertical mounts, the handle should be
mounted on the side, and on horizontal mounts. The handle
should be mounted on the end.
FIGURE 1.
FIGURE 2.