Cut Sheet

45
Technical Data TD01701001E
Effective March 2017
UL low-voltage busway
Pow-R-Way III
EATON www.eaton.com
Receptacle plug-in units
Eaton’s unique receptacle plug-in unit design makes them the most
flexible receptacle units in the industry. Pow-R-Way III receptacle
plug-in units come fully assembled and wired, reducing installation
time, and are built to order. They are CSA
®
and UL 857 Listed and
come in five different configurations.
Single receptacle unit
The single receptacle plug-in unit, shown in Figure 71, is configured
to order and uses Type FD single-pole or two-pole plug-in circuit
breakers. One receptacle comes with each unit that can be straight
blade or twist-lock, rated from 15 to 50 A. Each receptacle can also
be fixed mounted to the front of the enclosure or cord mounted
from the bottom of the enclosure (not as shown). Cord lengths are
1–15 ft in 1-ft increments. Consult NEC Sections 368, 400, and 645
for cord drop applications.
Quad receptacle unit
The quad receptacle plug-in unit, shown in Figure 72, is configured
to order and uses Type FD single-pole, two-pole, and three-pole
plug-in circuit breakers. Each unit comes with 2–4 NEMA configured
receptacles in any combination of straight blade and twist-lock and
three-wire, four-wire, and five-wire, rated 15–50 A. Each receptacle
is cord mounted from the bottom of the enclosure. Cord lengths
are 1–15 ft in 1-ft increments. Consult NEC Sections 368, 400,
and 645 for cord drop applications.
Figure 71. Single receptacle plug
Figure 72. Quad receptacle plug