Datasheet

03/22/2012 HPL-ED2011 V2.0 EN (UX111) 2 / 6
Direction of incoming supply   as required
Degree of protection   
Device   IP20
Terminations   IP00
Protection against direct contact   Finger and back-of-hand proof
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC
60068-2-27
 g 25
Altitude  m 2000
Terminal capacity screw terminals 
mm
2

Solid 
mm
2
1 x (1 - 6)
2 x (1 - 6)
Flexible with ferrule to DIN 46228 
mm
2
1 x (1 - 6)
2 x (1 - 6)
Solid or stranded  AWG 18 - 10
Specified tightening torque for terminal screws   
Main cable  Nm 1.7
Control circuit cables  Nm 1
Main�conducting�paths
Rated impulse withstand voltage U
imp
V
AC
6000
Overvoltage category/pollution degree   III/3
Rated operational voltage U
e
V
AC
690
Rated uninterrupted current = rated operational current I
u
= I
e
A 16 or current setting of the overcurrent release
Rated frequency f Hz 40 - 60
Rated frequency  Hz 40 - 60
Current heat loss (3 pole at operating temperature)  W 6
Lifespan, mechanical Operations x
10
6
0.05
Lifespan, electrical (AC-3 at 400 V) Operations x
10
6
0.05
Maximum operating frequency  Ops./
h

Max. operating frequency  Ops/
h
25
Short-circuit rating   
AC   
   ￫Engineering
DC   
Short-circuit rating  kA 60
Short-circuit rating   60
Motor switching capacity  kA
rms

AC-3 (up to 690 V)  A 16
DC-5 (up to 250 V)  A 16 (3 contacts in series)
Trip�blocks
Temperature compensation   
to IEC/EN 60947, VDE 0660  °C - 5 … 40
Operating range  °C - 25 … 55
Temperature compensation residual error for T > 40 °C  
0.25%/K
Setting range of overload releases  x I
u
0.6 - 1
Short-circuit release fixed  x I
u
14
Fixed short-circuit release   Basic device 14 x I
u
Short-circuit release tolerance   ± 20%
Phase-failure sensitivity   IEC/EN 60947-4-1, VDE 0660 Part 102
Technical�data�according�to�ETIM�4.0
Rated operation power at AC-3, 400 V  kWh 0.55
With integrated auxiliary switch   No