Installation Manual

BR plug-on neutral (PON) circuit breaker
installation tips
Please follow these specific steps when installing Eaton’s
BR PON circuit breakers.
•
Align the breaker “FIN” with loadcenter “SLOT”.
• Please refer to figure 1.
•
Rock the breaker back~45° and insert “FOOT” into
backpan.
• Please refer to figure 2.
•
While pulling the breaker towards the backpan slot, rotate
down to lock into place.
• Please refer to figure 3.
Figure 1
Figure 2
Figure 3
Eaton’s “Rock ‘N’ Lock” feature
provides a safe and secure
connection by easily rocking the
breaker clip onto the redesigned
in-board neutral.
Please note: Install long-body BR breakers (2 pole GFCI, 2 pole
AFCI, or surge) towards the bottom of the BR plug-on neutral
loadcenters below the twin neutral bars.