Use and Care Manual

ManualsBrandsEaton ManualsDimmers, Switches & OutletsAspire 8 Amp RF Single-Pole Rocker Wireless Light Switch - Alpine White

CORE Lighting Controls

PART 1 – GENERAL

1.01 SUMMARY

A. Scope: Includes ASPIRE RF switches, dimmers and related devices as specified herein for the areas indicated on

the drawings, specifications, and load schedules.

B. Related Sections: Section 16570 (Dimming Controls).

1.02 REFERENCES

A. UL 6B28

B. NOM

C. ANSI

D. FCC Part 15, Class B

E. Z-Wave Certified

1.03 SYSTEM DESCRIPTION AND OPERATION

A. Permanently installed, wallbox mounted switches, dimmers and accessories (remote units)

B. Permanently installed, wallbox mounted fan-speed controls

C. Permanently installed, wallbox mounted receptacles

D. Screwless wallplates

1.04 SUBMITTALS

A. Submit manufacturer's standard catalog data giving all product, application, wiring, and installation information on all

basic components and wallplate kits. Provide test data and/or samples as required to demonstrate conformance with

PART TWO of this specification.

1.05 QUALITY ASSURANCE

A. Manufacturer shall have a minimum of 15 years continuous experience in manufacturing wallbox dimming products.

B. Dimmers, switches and Fan-speed controls shall be cULus listed and NOM approved specifically for each required

load (i.e., tungsten, halogen, incandescent, electronic low voltage transformer, magnetic low voltage transformer, and

fluorescent). Manufacturer shall provide file card or certificate upon request. Universal load-type dimmers shall not be

acceptable.

C. To assure compatibility, all dimming controls shall be obtained from a single source with complete responsibility

over all lighting controls, including accessory products.

1.06 WARRANTY

A. All devices shall be covered by a minimum five-year warranty.

PART 2 – PRODUCTS

2.01 ACCEPTABLE MANUFACTURERS

A. Cooper Wiring Devices

B. Unless otherwise noted, all basic components (dimmer, fan-speed control, switch, accessory units, receptacle, and

communication outlets) shall be provided by one manufacturer.

Project Name:

Prepared By:

Project Number:

Date:

ASPIRE RF

Specification Submittal

Catalog Number:

Type:

| w w w.co r e l i g h t i n g c o n t r o l s . c o m

Summary of content (4 pages)

PAGE 1
CORE Lighting Controls ASPIRE RFTM Specification Submittal Project Name: Prepared By: Project Number: Date: Catalog Number: Type: PART 1 – GENERAL 1.01 SUMMARY A. Scope: Includes ASPIRE RF switches, dimmers and related devices as specified herein for the areas indicated on the drawings, specifications, and load schedules. B. Related Sections: Section 16570 (Dimming Controls). 1.02 REFERENCES A. UL 6B28 B. NOM C. ANSI D. FCC Part 15, Class B E. Z-Wave Certified 1.
PAGE 2
CORE Lighting Controls 2.02 EQUIPMENT A. ASPIRE RF Lighting Controls 1. Performance a. Dimmers shall provide full-range, continuously variable control of light intensity. b. Wall controls shall fit a decorator wallplate opening with a paddle switch. c. Controls shall have a two-tone color and/or finish (gloss or matte). d. Controls shall provide single-pole/multi-location with choice of accessory devices. e.
PAGE 3
CORE Lighting Controls v. Controls shall incorporate power-failure memory. Should power be interrupted and subsequently returned, the lights or fans will come back on to the same levels set prior to the power interruption. Restoration to some other default level is not acceptable. w. Controls shall not be susceptible to damage or loss of memory due to static discharge. x. Controls shall operate in an ambient temperature range of 0°C (32°F) to 40°C (104°F). y.
PAGE 4
CORE Lighting Controls b. Data jack (9557) shall be designed to mate with standard 8-conductor modular jacks and be compatible with 2, 4, 6, 8 conductor lines. c. Telephone jack (9556) shall be designed to mate with standard 4- or 6-conductor modular jacks, and be compatible with 2, 4, or 6 conductor lines. Telephone jacks shall meet FCC Part 68, paragraph F standards to ensure compatibility with U.S. telephone systems. d.