Technical Bulletin
Eaton’s easy lift mounting base
for transformers
The dry-type distribution transformer business has recently
invested in and launched an innovative new concept for the
packaging and installation of high-volume transformers (75 kVA
and below: three-phase; 50 kVA and below: single-phase).
The easy lift mounting base features:
•
Pallet-less shipping
•
4-inch clearance to facilitate ease of lifting/positioning
•
Easy access to mounting holes
•
Reduced installation time
•
Trapeze mounting accessible
•
Lower center of gravity
•
Alternative base mounting option
•
Field convertible
Bene ts that these options provide:
Labor and time savings
•
The easy lift mounting base eliminates the common practice
of rocking a transformer off a pallet. It normally requires two
people to remove a transformer from a pallet. The easy lift
mounting base requires NO pallet; therefore, one person can
handle the transformer
•
Quicker installation time—Anchors used to secure the
transformer to the floor can easily be installed by one person.
It is not necessary to remove the front/back covers of the
transformer, nor the protective packaging
Increased workplace safety
•
The pallet-less shipping method eliminates the need to manually
separate a transformer from its pallet. There are significant risks
to employees of back and foot injuries while attempting to “rock”
a transformer off its pallet
•
A pallet-less transformer reduces the opportunity to cause
damage to the transformer. Dropping a transformer or
accidently tipping it over poses a risk to life and property
Environmentally friendly
•
No pallet means there is less packing material to dispose,
conserving landfill resources
•
Unbleached cardboard is used for protection during shipment
Featuring Eaton’s easy lift mounting base for transformers
Dry-type distribution transformer