Instruction manual

ManualsBrandsEaton ManualsConsumer electronicsSPD Series

Effective September 2013

Instruction Manual IM01005022E

Installation Instructions for Eaton Surge Protective

Device xxPHxxxxx and xxPVxxxxx

Contents

Description Page

Introduction ..............................2

Safety Precautions .........................2

Operation ................................2

Preparation ..............................2

Installation Procedures .....................3

Enclosure Mounting (New Applications -

Eaton PH and PV Models) ................3

Enclosure Mounting (Existing Aegis HW

applications) ...........................3

Wiring Instructions Eaton PH Model ...........3

Enclosure Mounting (Existing Aegis VL

applications) ...........................5

Wiring Instructions Eaton PV Model ...........5

Specifications ............................7

Diagnostics ..............................7

Maintenance .............................7

Terms and Conditions ......................7

Warranty ................................8

PH Model

PV Model

Summary of content (8 pages)

PAGE 1
Instruction Manual IM01005022E Effective September 2013 Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Contents Description PH Model PV Model Page Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation . . . . .
PAGE 2
Instruction Manual IM01005022E Effective September 2013 Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Introduction Preparation Eaton’s PH and PV products are premium Surge Protective Devices (SPDs) with filtering. They are applied to protect sensitive electronic equipment (critical loads) from transients and electrical line noise. Correct installation is critical for the proper operation of the Eaton PH and PV devices.
PAGE 3
Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Installation  WARNING INSTALLING AN SPD THAT IS IMPROPERLY RATED FOR THE ELECTRICAL SYSTEM VOLTAGE COULD CREATE A POTENTIALLY HAZARDOUS CONDITION, RESULTING IN INJURY OR EQUIPMENT DAMAGE.  CAUTION EATON SPD PRODUCTS MUST BE INSTALLED OR REPLACED BY A QUALIFIED ELECTRICIAN TO AVOID INJURY OR EQUIPMENT DAMAGE.  WARNING TURN OFF THE POWER SUPPLY BEFORE WORKING IN ANY ELECTRICAL CABINET OR ON ANY CIRCUIT BREAKER PANEL.
PAGE 4
Instruction Manual IM01005022E Effective September 2013 Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Figure 2. Eaton PH Premium Hybrid Filter Bonded System Block Diagram. Figure 3. Eaton PH Premium Hybrid Filter Unbonded System Block Diagram. 4 EATON www.eaton.
PAGE 5
Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Enclosure Mounting (Existing Aegis VL applications)  CAUTION THE INPUT AND OUTPUT TERMINAL LOCATIONS ARE NOT POSITIONED ON THE SAME SIDE OF THE ENCLOSURE TOP COVER AS THE FORMER AEGIS VL MODELS. ROUTE WIRING TO ACCOMMODATE THE NEW INPUT AND OUTPUT TERMINAL LOCATIONS. Aegis VL devices mounted to a DIN Rail using the attached DIN clip.
PAGE 6
Instruction Manual IM01005022E Effective September 2013 Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Figure 5. Eaton PV Premium Filter Bonded System Block Diagram. Figure 6. Eaton PV Premium Filter Unbonded System Block Diagram. 6 EATON www.eaton.
PAGE 7
Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Instruction Manual IM01005022E Effective September 2013 Specifications Table 3.
PAGE 8
Instruction Manual IM01005022E Effective September 2013 Installation Instructions for Eaton Surge Protective Device xxPHxxxxx and xxPVxxxxx Warranty Eaton warrants these products for a period of 10 years from the date of delivery to the purchaser, 15 years if the product is properly registered with Eaton, to be free from defects in both workmanship and materials.