Datasheet

03/21/2012 HPL-ED2011 V2.0 EN (UX111) 4 / 6
Degree of protection (IP), front side   IP65
Number of auxiliary contacts as change-over contact   0
Interlockable   No
Motor drive integrated   No
Connection type main current circuit   Screw connection
Version as emergency stop installation   No
Type of control element   Toggle
Version as main switch   No
Version as switch disconnector compact   No
Version as safety switch   No
Version as maintenance-/service switch   No
Rated operation power at AC-23, 400V  kWh 6.5
Rated operation power AC-3, 400 V  kWh 4
Suitable for ground mounting   No
Suitable for front mounting   YES
Suitable for front mounting center   No
Suitable for distribution board installation   No
Suitable for intermediate mounting   No
Max. rated operation voltage Ue AC  V 690
Motor drive optional   No
Voltage release optional   No
Device construction   Built-in device fixed built-in technique
Characteristics
Form for ordering non-standard front plates
For utilisation category AC-4 (extreme load: 100 % inching, reversing or plugging)
The blocked rotor current of the motor should not exceed the rated current of the switch for AC-21A to ensure a reasonable device lifespan.
Dimensions