Instruction manual

USING THE CONTROL PANEL

Eaton

9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4 www.eaton.com/powerquality

8-31

Select UNIT TYPE from the System Setup Level 0 menu to display the Unit Type

screen. The Unit Type screen provides the model, CTO, and serial numbers of the

UPS unit. Figure 8‐41 shows the Unit Type screen. To return to the System Setup

screen, press the

pushbutton.

MODEL:

CTO:

Eaton 9390

SERIAL:

0000000000000000

UNIT TYPE

Figure 8‐41. Unit Type Screen

8.2.9 System Setup Level 1 Screens

A password is required to access the Level 1 functions. To enter the password, select

ENTER PASSWORD from the System Setup Level 0 menu to display the Enter

Password screen. Figure 8‐42 shows the Enter Password screen.

Use the

or pushbuttons to select the password character position. Use the or

pushbuttons to change the password character. Once the password is entered,

press the DONE pushbutton. The System Setup Level 1 menu screen is displayed. The

default password is L1.

ENTER PASSWORD

DONE

Figure 8‐42. Enter Password Screen