Instruction manual

USING THE CONTROL PANEL

Eaton

9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4 www.eaton.com/powerquality

8-33

Select CHANGE PASSWORD from the System Setup Level 1 menu to display the

Change Password screen. The Change Password screen allows the System Setup

Level 1 password to be changed. Figure 8‐44 shows the Change Password screen.

Use the

or pushbuttons to select the password character position. Use the or

pushbuttons to change the password character. Once the new password is

entered, press the DONE pushbutton. The Change Password Save screen is displayed.

NEW:

OLD: L1

CHANGE PASSWORD

DONE

Figure 8‐44. Change Password Screen

The Change Password Save screen lets you save the new password, retry another

password, or abort the password change. Figure 8‐45 shows the Change Password

Save screen.

Press SAVE, RETRY, or ABORT. If SAVE or ABORT is pressed, the action is completed,

and the System Setup screen displays. If RETRY is pressed, the Change Password

screen is redisplayed.

NEW:

OLD: L1

CHANGE PASSWORD

ABORT

SAVE RETRY

Figure 8‐45. Change Password Save Screen