Instruction manual

UPS OPERATING INSTRUCTIONS
Eaton
®
9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4 www.eaton.com/powerquality
9-18
3. To restart the UPS after using the REPO pushbutton, follow the procedure in
paragraph 9.1.1 or 9.1.2.
NOTE Follow Lockout/Tagout (LOTO) procedures for your location. The key should not be stored in the
switch. DO NOT insert the key until the fault is resolved.
Deactivated
Unlock pushbutton to release
Activated
Pushbutton locked into place
Figure 9‐2. REPO Operation