Instruction manual

RESPONDING TO SYSTEM EVENTS
Eaton
®
9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4 www.eaton.com/powerquality
11-4
Table 11‐1. Alarms (continued)
IndicationLog*RelayPhoneHornMessage
L3 Overload (High Level) 1 No 1 HA User Action Required
L3 Overload (High Level) OK Off No 1 HA Condition Cleared
Low Battery Shutdown 1 No 1 HA User Action Required
Low Battery Shutdown OK Off No 1 HA Condition Cleared
Not Enough UPMs 1 No 1 HA User Action Required
Not Enough UPMs OK Off No 1 HA Condition Cleared
Output Overload 1 No 1 HA User Action Required
Output Overload OK Off No 1 HA Condition Cleared
Output Watts Overload 1 No 1 HA User Action Required
Output Watts Overload OK Off No 1 HA Condition Cleared
Parallel System Overload 1 No 1 HA User Action Required
Parallel System Overload OK Off No 1 HA Condition Cleared
Rect Overtemperature Trip 1 No 1 HA Service Required
Rect Overtemperature Trip OK Off No 1 HA Condition Cleared
Rectifier Overtemperature 1 No 1 HA Service Required
Rectifier Overtemperature OK Off No 1 HA Condition Cleared
Remote Emergency Power-off 1 No 1 HA User Action Required
Remote Emergency Power-off OK Off No 1 HA Condition Cleared
Selective Trip 1 1 1 HA Service Required
Selective Trip OK Off No 1 HA Condition Cleared
Shutdown Imminent 1 No 1 HA User Action Required
Shutdown Imminent OK Off No 1 HA Condition Cleared
Software Incompatibility 1 No 1 HA Service Required
Software Incompatibility OK Off No 1 HA Condition Cleared
Utility Out Of Limits 1 No 1 HA User Action Required
Utility Out Of Limits OK Off No 1 HA Condition Cleared
* Log codes indicate where the UPS records the event: H = History log, HA = History and Active logs, and A = Active log only.