Instruction manual

USING THE CONTROL PANEL
Eaton
®
9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4 www.eaton.com/powerquality
8-23
Select CALCULATION METHOD from the Maximum Current Log Setup screen 2 menu
to display the Calculation Method Setup screen. The Calculation Method Setup screen
allows the full load limit of the event being monitored to be changed. Figure 8‐30
shows the Calculation Method Setup screen.
Use the
or pushbuttons to highlight the calculation method desired, then press
the SELECT pushbutton. The action is completed, and the Maximum Current Log
Setup screen 2 displays.
To return to the Maximum Current Log Setup screen 1, press the
pushbutton on
the menu bar.
LEVEL BASED ON 3 PHASE AVERAGE
MAXIMUM CURRENT LOG SETUP
SELECT
LEVEL BASED ON INDIVIDUAL PHASES
Figure 8‐30. Calculation Method Setup Screen