Datasheet

ManualsBrandsEaton ManualsAutomationProtective Motor Relay 2.4 ... 4A 240/24VAC/VDC Class 10 1NC + 1NO ZE Series

03/26/2012 HPL-ED2011 V2.0 EN (UX111) 1 / 5

Overload�relay�2,4�-�4A

Part�no. ZE-4

Article�no. 014518

Program

Product range   ZE overload relays for mini contactor relays

Phase-failure sensitivity   IEC/EN 60947, VDE 0660 Part 102

Description   Test/off button

Reset pushbutton manual/auto

Trip-free release

Mounting type   Direct mounting

Setting�range   

Overload releases I

A 2.4 - 4

Contact sequence  

Auxiliary contacts   

N/O = Normally open   1 N/O

N/C = Normally closed   1 N/C

For use with   DILEM

DIULEM/21/MV

SDAINLEM

Short-circuit protection   

Type “1” coordination gG/gL A 20

Type “2” coordination gG/gL A 10

Notes

Overload release: tripping class 10 A

Short-circuit protection: Observe the maximum permissible fuse of the contactor with direct device mounting.

Suitable for protection of Ex e-motors

II (2) GD

PTB 10 ATEX 3014

Observe manual AWB2300-1425D/GB.

Notes

When fitted directly to the contactor a clearance of at least 5mm is required between the overload relays.



1 Contactor 

Approbationen

UL approval Yes

CSA approval Yes

Product Standards UL 508; CSA-C22.2 No. 14; IEC/EN 60947-4-1; CE marking

UL File No. E29184

UL CCN NKCR

CSA File No. 12528

CSA Class No. 3211-03

NA Certification UL listed, CSA certified

Specially designed for NA No

Suitable for Branch circuits

Max. Voltage Rating 600 V AC

Summary of content (5 pages)

PAGE 1
Overload�relay�2,4�-�4A Part�no. Article�no. Program ZE-4 014518 Product range ZE overload relays for mini contactor relays Phase-failure sensitivity IEC/EN 60947, VDE 0660 Part 102 Description Test/off button Reset pushbutton manual/auto Trip-free release Mounting type Direct mounting Setting�range Overload releases Ir A 2.
PAGE 2
Degree of Protection IEC: IP20, UL/CSA Type: - General Standards IEC/EN 60947, VDE 0660, UL, CSA Climatic proofing Damp heat, constant to IEC 60068-2-78 Damp heat, cyclic to IEC 60068-2-30 Ambient temperature °C Operating range to IEC/EN 60947 PTB: -5 °C - +55 °C Open °C - 25 - 50 Enclosed °C - 25 - 40 Temperature compensation Continuous Weight kg 0.
PAGE 3
Safe isolation to VDE 0106 Part 101 and Part 101/A1 between the auxiliary contacts V AC 300 6 Conventional thermal current Ith A Rated operational current Ie A 120 V Ie A 1.5 240 V Ie A 1.5 415 V Ie A 0.5 500 V Ie A 0.3 120 V Ie A 1.5 240 V Ie A 1.5 415 V Ie A 0.7 500 V Ie A 0.5 24 V Ie A 0.9 60 V Ie A 0.75 110 V Ie A 0.4 220 V Ie A 0.2 A gG/ gL 4 AC-15 Make contact Break contact DC-13 L/R - 15 ms Short-circuit rating without welding max.
PAGE 4
These tripping characteristics are mean values of the spread at 20 °C ambient temperature in a cold state. Tripping time depends on response current. On devices at operating temperature the tripping time of the overload relay drops to approx. 25 % of the read value. Specific characteristics for each individual setting range can be found in the manual. CAD-Data Product standards CAD data: http://eaton-moeller.partcommunity.com Dimensions 03/26/2012 HPL-ED2011 V2.
PAGE 5
Additional�product�information�(links) IL03407007Z (IL03407007Z) Overload relay ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL03407007Z2010_10.pdf MN03407003Z-EN (AWB2300-1425) ZE motor-protective relay; Overload monitoring of Ex e motors - Deutsch / English ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN03407003Z_DE_EN.pdf 03/26/2012 Eaton Industries GmbH http://www.moeller.net/en © 07/2011 by Eaton Industries GmbH HPL-ED2011 V2.