Datasheet

11/30/2015 286052 - HPL-ED2015 V17.0 EN 1 / 2
Auxiliary�contact,�for�PLS,�postal�Code,�PKNM,�ZP-A40...-ASA...IHK...WHK,
Z-MS,�1N/O+1N/C,�0.5HP
Part�no. ZP-IHK
Article�no. 286052

Delivery�programme
Basic function   Accessories for combined residual-current/power circuit-breakers
Accessories for miniature circuit breaker
Basic function accessories   Auxiliary contacts
Application   Switchgear for industrial and commercial applications
Product range   Accessory
Side mounting   for fitting on left to: LS, FI/LS
Contact sequence  
Design�verification�as�per�IEC/EN�61439
Technical data for design verification   
Operating ambient temperature min.  °C -5
Operating ambient temperature max.  °C 40
Technical�data�ETIM�6.0
Devices for distribution board-/surface mounting (EG000062) / Auxiliary contact unit for distribution board (EC001286)
Electric engineering, automation, process control engineering / Electrical installation, device / Breaker switch component / Auxiliary contact unit for distribution board (ecl@ss8.1-27-14-35-02
[AKE327010])
Device fitting   Universal
Additional equipment   Auxiliary switch
Attached at delivery   No
Assembly width (TE)   0.5
Number of normally open contacts   1
Number of normally closed contacts   1
Number of change-over contacts   0
Number of fault-signal switches   0
Rated switch current  A 3
Nominal rated voltage  V 230
Control voltage type   AC
With autotest for earth leakage function   No
Suitable for max. number of poles main contact unit (total)   2
Suitable for max. current main contact unit  A 6