Specification Sheet

Specications RM40 RM40-P
Model No.
10187MB-US 10187MP-US
Height 25” (620mm) 25” (620m)
Width 15” (385mm) 15” (385mm)
Depth 14” (360mm) 14” (360mm)
Weight 42 lbs (19kg) 46 lbs (21kg)
Voltage 110 V 110 V
Phase 1 1
Frequency 60 Hz 60 Hz
Current 3.3 A 3.3 A
Power 344 W 344 W
Airflow 170cfm (287m3/
hr)
170cfm (287m3/
hr)
Noise Level 47 dba 47 dba
Refrigerant R410a R410a
Effective Volume 3,000 cu.ft (85m3) 3,000 cu.ft (85m3)
Extraction @ 65°F 60%RH 24 ppd 24 ppd
Efficiency @ 65°F 60% RH 1.4 l/kW 1.4 l/kW
Typical Extraction @ 80°F 60% 34 ppd 34 ppd
Typical Efficiency @ 80°F 60% 1.9 l/kW 1.9 l/kW
Minimum Operating Temp 33°F (1°C) 33°F (1°C)
Maximum Operating Temp 95°F (35°C) 95°F (35°C)
Features RM40 RM40-P
Model No. 10187MB-US 10187MP-US
On/Off Control
4 4
Adjustable Control Humidistat
4 4
Fitted Mains Plug
4 4
Castors
4 4
Integral Water Container
4
X
High Lift Condensate Pump
X
4
Electronic Defrost Control
4 4
Compressor Type
Rotary Rotary
Bucket Full Indicator
4 4
Permanent Drain Facility
4
X
Hot Gas Defrost System
4 4
Washable Air Filter
4 4
Quick Release Hose Connector
4 4
Moulded Carrying Handles
4 4
10’ Length of PVC Drain Hose
X
4
Galvanised Steel Subframe
4 4
RM40 & RM40-P DehuMiDifieR
APPlicAtion
The EIP RM40 / RM40-P compact unit, is surprisingly quite, yet have the features of many
larger models. They are rugged enough for industrial shops and storerooms. Their
attractive appearance makes them suitable for basement or garage applications.
Key Design feAtuRes
• RotomouldedCover&Base
• EIP’sunique“HotGas”defrostingfeaturewhichautomaticallymelts
away frost buildup providing effective
operation at low ambient temperatures.
• Rugged,galvanisedSubframe
• Simplicityofinstallationandoperation.
• IntegralWaterContainer
• MouldedHandles.
RM40-P ADDitionAl feAtuRes
• HighliftIntegralCondensatePumpin
place of integral water container
HIGH CAPACITY • COMPACT • LOW TEMPERATURE
INDUSTRIAL INSTITUTIONS • RENTALS
sPecificAtions