Specification Sheet

Ebac Industrial Products Incorporated
Virgina Office :- 700 Thimble Shoals Blvd. Suite 109, Newport News, VA 23606-2575
California Office :- 2060 Chicago Ave, Suite C7, Riverside. CA 92507
Tel: [phone] Fax: [phone] www.ebacusa.com
PRoven PeRfoRMAnce
The EIP RM40 / RM40-P dehumidifiers are compact, stand
alone units which provides quiet, maintenance free service
in extreme environments, without the cost, and irritation
of coil freeze-up. This simple, yet effective solution is
ideal for a damp basement or clammy locker rooms it
can be is easily transported to the problem area, and
goes quietly to work. The RM40-P has all the qualities
of the RM40, however the integral water container is
replaced with a high capacity condensate pump.
This unit is ideal for un-manned installations.
the DehuMiDifieR
EIPL dehumidifiers are effective solutions to environmental control problems. The RM range of units
are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the
air through the refrigeration process The fan draws the moist air through the cold evaporator coil,
which cools the air below its dew point. Moisture forms on the evaporator coil andis collected in
the condensate tray, which is equipped with an internal condensate pump for easy removal
of collected moisture. The cooled air then passes through the hot condenser coil where it is
reheated using the same energy removed during the cooling phase, plus the additional heat
generated by the compressor. The air is, therefore, discharged from the dehumidifier at
a slightly higher temperature with a lower absolute humidity than that which entered.
Continuous circulation of air through the dehumidifier gradually reduces the relative
humidity within the area. Because the RM ranges of units are equipped with an
internal humidistat, they automatically switch on and off to save energy and
expense by maintaining the desired level of humidity with intermittent
operation. The additional features of the RM40P make the unit the
ideal choice for un- manned installations, as the condensate
pump will pump the condensation into a toilet sink etc.
the PRobleM
Excess humidity in your crawl space, warehouse, office
factory or shop results in corrosion, mold growth and
rotting. Enormous costs are incurred every year through
damage to inventory and through inflated building
maintenance costs as a result of dampness. Even if your
building seems dry during the day, at night when the
temperature falls the humidity rises and the condensation
process begins. The compact physical size, and high
performance, makes the RM40 family the ideal choice for
many applications.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications RM40 RM40-P
Model No.
10187MB-US 10187MP-US
Warehouses
4 4
Basements
4 4
Water Damage Restoration
4 4
De-Flooding
4
Sports Halls
4 4
Storage Areas
4 4
Laboratories
4 4
Applications RM40 RM40-P
Model No.
10187MB-US 10187MP-US
Oil Rigs
4 4
Agriculture
4 4
Kitchens
4 4
Pumping Stations
4 4
Hotel / Motel
4 4
Stadiums
4 4
Ships / Barges
4 4