Operation Manual

Settings & Controls

Please refer to the image above when numbers are indicated within the instructions

Switching on your dehumidifier

Stand your dehumidifier upright for a minimum of 2 hours before switching on.

Remove the bucket and plug the

unit in

The Status light (8) will be illuminated red indicating the

water bucket is not present.

This is the same red light that will illuminate when the

bucket is full.

Place the bucket in the unit and

close the door

The Status light (8) will now be illuminated orange; the unit

is now in STANDBY mode.

Press the STANDBY button (3) to

turn the unit on

The Status light (8) will now be illuminated blue; the unit is

now operating.

The unit will start running in SMART mode. We

recommend that you use this setting permanently unless

you have a problem with damp or would like to dry laundry

(see Using the Laundry Drying Function).