Installation Guide

Page 3 of 13
Drawing : - TPC381
Issue : - 3
Date : - 10/12/13
UNPACKING
Thank you for deciding to purchase an Ebac dehumidifier. Like the many tens
of thousands of people who have already bought an Ebac dehumidifier we are
confident you will find it is the most effective answer to the problem of
condensation and dampness related problems
Carefully remove the Orion dehumidifier unit from its transit box and visually
check for signs of transit damage. If there is evidence of damage DO NOT
attempt to operate the unit, call your supplier for advice. Do not discard the
packing; it will be useful when transporting the dehumidifier unit in the future.
Your dehumidifier is packed in a plastic wrapping, please ensure that it is
disposed of safely and where it will not be a danger to children.
INTRODUCTION
This user manual tells you how to use the Orion dehumidifier. Please read it
thoroughly before operating the dehumidifier. If you have any questions about
the unit please contact our Customer Services Department at the address
shown at the back of the section or phone [phone].
Dehumidifiers remove moisture from the air circulating through it.
Continuous operation reduces the relative humidity the air and this helps
prevent rust, rot, mould, mildew and condensation.
The Orion dehumidifier consists of an air to air heat exchange, motor,
compressor unit, a refrigerant condenser and air circulating fan, a refrigerated
surface, a means for collecting and disposing of the condensed moisture and
a cabinet to house these components.
GENERAL
The Orion dehumidifier must only be stored and transported in the vertical
position. To operate, stand the unit on level ground, and connect power
supply and it is ready for operation.
When a generator is used to supply the power, it is essential to check the
minimum kva required in the technical section within this manual. The
generator must be started before connection is made to the dehumidifier.