Specification Sheet
SPECIFICATIONS 10560RD-US 10560RH-US
Height 37” (945mm) 37” (945mm)
Width 21.5” (545mm) 21.5” (545mm)
Depth 19” (492mm) 19” (492mm)
Weight 99 lbs (45kg) 99 lbs (45kg)
Voltage 115 V 115 V
Current 6 A 6 A
Phase 1 1
Frequency 60 (Hz) 60 (Hz)
Power 680 W 680 W
Airflow 330 cfm (390
m3/hr)
330 cfm (390
m3/hr)
Noise Level 52 dba 52 dba
Refrigerant R407C R407C
Effective Volume 8,369 cu.ft
(237m3)
8,369 cu.ft
(237m3)
Typical Extraction 70 ppd (33 l/d) 70 ppd (33 l/d)
FEATURES RM85 RM85H
On/Off Control
4 4
Electronic Humidity Control
4
Hours Run Meter
4 4
Pump Purge Switch
4 4
Hot Gas Defrost
4 4
Electronic Defrost Timer
4 4
Washable Air Filter
4 4
Large Diameter Wheels
4 4
Free Standing
4 4
Integral Condensate Pump
4 4
Moulded Lifting Handles
4 4
Ductable
4 4
Ridged Handle
4 4
Cable / Hose Wrap
4 4
Rotational Moulded Body
4 4
Stackable
4 4
RM85 DEHUMIDIFIER
HIGH CAPACITY, COMPACT, LOW TEMPERATURE DEHUMIDIFIERS
FOR PROFESIONAL WATER DAMAGE AND CARPET SPECIALISTS
SPECIFICATIONS
APPLICATION
EIPL are a recognized world wide supplier of flood restoration drying equipment. We offer a variety of
dehumidifiers and air movers to remove water and assist with drying areas after water damage. Following a flood,
whether it is in your basement or office, it’s vitally important to restore the damaged area to good order as soon
as possible to protect your health from microorganisms, mold and bacteria that may grow and ultimately prevent
further damage. Whether it is a flash flood, heavy rains or water main break, EIPL have the equipment to handle
the harshest environments and assist with proper restoration
KEY DESIGN FEATURES
• Washable Air filter for easy maintenance
• Large diameter rugged wheels
• Ridged handle for easy transport
• High capacity Integral condensate pump
• Hours Run Meter providing accurate run time
measurements
• High efficiency rotary compressor.
• EIPL’s unique thermostaically controlled “Hot Gas”
defrosting feature which automatically melts away frost
buildup providing effective operation at both low and
high ambient temperatures.
• Durable Rotational Molded Polyethylene Housings
• Simplicity of installation and operation with a standard
115V plug
• Robust controls / control panel
• Stackable