Instruction Manual

5
SPECIFICATIONS
SAFETY FEATURE
OVERHEAT SAFETY FEATURE
This heater is fitted with a safety cut-off which will operate if the fire overheats (e.g. due to
blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
Reconnect to the mains supply and switch on the appliance.
WARNING:
It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet
and the plug may cause overheating of the plug. If this occurs, try inserting
the plug into a
different outlet. Contact a qualified electrician to inspect the original outlet
for damage.
WARNING:
When you plug in a 1500 watt electric fireplace into a receptacle, you have engaged the maximum
amount of electricity that can be run on that entire circuit. If lights are on the same circuit, or other
receptacles on the circuit are in use, the circuit should overheat and trip the breaker or blow the fuse
to protect you.
Please use a dedicated circuit , that is one breaker supplying the power to a single receptacle, in using
this electric fireplace.
Voltage Rating 120 V ~ 60Hz
Power Consumption 1500W
Unit Size 33.46 in. (W) x 3.74 in. (D) x 25.59 in. (H)
25.98 in. (W) x 3.74 in. (D) x 20.47 in. (H)