Instruction Manual

8
POWER OUTLET
The heater can be wall-mounted, which can be used in the living room or bedroom. Plug the unit into
a 120 V 60 Hz electrical outlet, and open the switching power supply.
WALL-MOUNTED INSTALLATION GUIDE LINES
Your new electric fireplace may be installed virtually anywhere in your home. However,
when choosing a location be sure to follow the general instructions included. For best results
install out of direct sunlight. Power supply service must be either completed or
placed within
the electric fireplace prior to finishing to avoid reconstruction.
Warning: check the wall to ensure that there are no wires, pipes, etc. when drilled holes in this area.
Warning: the product is not plugged in before hanging wall.
Warning: the heater cannot be fixed in the hollow wall. The heater must be installed on the solid wall.
Warning: to prevent fire, there is no other furniture on
the top of the fireplace, the following are the minimum distance
from the front and side of the heater to the wall.
Up
1.0m
down
0.5m
left
0.5m
right
0.5m