Operation Manual

Operation manual

LED Flush mount light

Thank you for purchasing our product. This fixture has

been manufactured from components with advanced

optoelectronics to ensure high reliability and long life.

Before assembling please read this Operation Manual

carefully and save in a safe place for future reference.

Please note that all electrical connections must be in

accordance with local and National Electrical Code

standards as well as local building codes. In case you are

not familiar with proper wiring connections and building

codes, consult a qualified electrician.

With Integrated Dimmable Driver

Safety recommendations

RISK OF ELECTRIC SHOCK – THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE

WITH APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH MENTIONED

ABOVE CODES AND HAZARDS INVOLVED. DISCONNECT POWER AT CIRCUIT BREAKER

OR FUSE BEFORE INSTALLING OR SERVICING.

2. Before use of the product carefully read the whole Operation Manual.

3. THE PRODUCT IS PURPOSED FOR INTERIOR USE ONLY, SUITABLE FOR

DAMP LOCATIONS.

4. Protect the product against direct contact with water.

5. Assemble the product only with the use of parts provided and the housing;

improper assembly may result in device failing which could damage the product,

personal property or cause injury.

6. Assembly shall follow with accessories delivered with the set only.

7. The device is not a toy, KEEP OUT OF REACH OF CHILDREN.

Specifcations:

Power consumption: 12.5W/16.5W

Color Temp.: 2700K/3000K/4000K/5000K

Life span: 50,000h

Illumination authorization<5%

per 10,000h

As an ENERGY STAR partner, Satco

has determined that this product

meets the ENERGY STAR® guidelines

for energy effciency

Operating Voltage:120VAC

Dimming: Triac

PAGE 1
Operation manual LED Flush mount light With Integrated Dimmable Driver Thank you for purchasing our product. This fixture has been manufactured from components with advanced optoelectronics to ensure high reliability and long life. Before assembling please read this Operation Manual carefully and save in a safe place for future reference. Please note that all electrical connections must be in accordance with local and National Electrical Code standards as well as local building codes.
PAGE 2
Dimming This product is compatible with most residential type dimmers available on the market. The dimming performance will depend on kind of dimmer and dimmer settings. Visit website for an up to date list of compatible dimmers. Cleaning • Clean with a soft or damp cloth. While cleaning with the damp cloth make sure the power is off. • Do not clean with liquids or abrasives. Step 1 Step 2 Step 3 Turn-off /disconnect power at circuit breaker.