SPECIFICATION SHEET Soap Dish Side 4⅜” 17⁄16” 2” 1⅞” 7⁄16” Top 7⁄16” 4⅞” All measurements are approximate and may vary +/- 1/4" SPECIFICATION SHEET
INSTALLATION AND WARRANTY GUIDE 1. 2. ؼ” 3. 4. INSTALLATION AND WARRANTY GUIDE Using a ¼” drill bit, drill two pilot holes approximately 1-3/16 ” deep and use the base bracket to determine the distance apart. Insert the plastic wall anchors into the two pilot holes, making sure the anchor and the wall are even. Using the provided screws, attached the base bracket to the wall. Fit the base into position and lock it with the set screw using an Allen wrench.