Assembly Instructions

Loveseat

THANK YOU FOR PURCHASING

LIMITED WARRANTY

We warrant to the original purchaser that this product will be free from defects in material and

workmanship as described below. We will repair or replace, at its option, without charge to the

original purchaser only, defective products or parts for one (1) year from the date of purchase.

Replacement parts can only be supplied if parts are available. Items out of production may be

unavailable. This warranty shall be effective for the applicable time period beginning from the

date of purchase as shown on your original sales receipt. This warranty is your sole remedy for

product defects and excludes defects due to or arising in connection with product abuse or

misuse, use modiﬁcation of, or attachments to the product, and products or parts not used,

maintained,or installed in accordance with the company’s installation, maintenance and/or

applicable guidelines. There are no other warranties, express or implied, other than those

speciﬁcally described, including without limitation any implied warranty of merchantability or of

ﬁtness for a particular purpose. We will not be responsible for incidental or consequential

damages. Some states do not allow the exclusion or limitation of incidental or consequential

damages,so the above limitations or exclusions may not apply to you. This warranty gives you

speciﬁc legal rights and you may also have other rights which may vary from state to state. Our

quality standards are among the highest in the industry. Sometimes, no matter how hard we try,

there are times when parts are damaged or missing. Our Parts Department will do everything

possible to promptly remedy the problem.

PAGE 1
THANK YOU FOR PURCHASING Loveseat LIMITED WARRANTY We warrant to the original purchaser that this product will be free from defects in material and workmanship as described below. We will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of production may be unavailable.
PAGE 2
Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website, email or write us.
PAGE 3
Step 1 Step 2 2 2 D 3 A B C B C 1 A 1 D Step 3 Step 4 3 D C B 1 A 6
PAGE 4
Step 5 4 5 Step 3
PAGE 5
(This is a non printing page) Instructions Printing Rules The following must be followed: 1. No changes should be made to these documents. If changes are needed they must be made through us. 2. All items will be printed at the size intended. Finish trim size is 81/2” X 11” 3. All Items will be printed on a printing press unless other arrangements are made before printing. 4. Paper should be white, at least 80# gloss text and coated both sides. 5. Failure to follow these rules could result in back charges.