Caution: You must read this before you proceed BED NOTE: This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BED is HEAVY. To prevent injury to yourself or damage to the product a minimum of two adults are required whenever moving or lifting the product.
C Side Rail(Labelled 'C') 2 D Footboard 1 E Right Headboard Foot 1 F Left Headboard Foot 1 G Headboard Support Rail 1 H Side Cleat 4 I Center Side Cleat 2 J Leg 2 K Cross Center Support Rail 1 L Center Support Leg 2 M Slat 24 N Center Support 2 Page 2 OF 12
O Straight Connector 4 P U-shaped Support Leg 1 Q Z-shaped Support Leg 2 Description QTY ① Bolt(M8*16mm) 9 ② Bolt(M6*35mm) 13 ③ Bolt(M6*16mm) 19 ④ Bolt(M8*25mm) 5 ⑤ Bolt(M8*50mm) 9 ⑥ Bolt(M8*30mm) 5 ⑦ Bolt(M6*25mm) 7 ⑧ Spring Washer 9 ⑨ Washer 15 ⑩ Allen Key(M6) 1 ⑪ Allen Key(M8) 1 ⑫ Side Slat Plug 28 ⑬ Center Slat Plug 14 Label Picture Page 3 OF 12
Before Beginning Assembly: x2 x2 x4 x2 x2 x2 x24 x2 x14 x2 x13 x9 x5 Overview x4 x7 x19 x9 x28 x5 x9 x15 Headboard(A) Right Headboard Foot(E) Headboard Support Rail(G) Left Headboard Foot(F) Side Rail(B) Cross Center Support Rail(K) Side Rail(C) Side Rail(C) Slat(M) Side Rail(B) Footboard(D) Leg(J) FRONT FACING Page 4 OF 12
This Bed has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Bed parts, the above picture is to help you put the various Bed parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 x2 x2 x4 x2 x2 x2 x2 x24 x4 x2 Unpack and place all parts for clear visibility. Step 2 Back side Align the mounting position of Right Headboard Foot(E) to the back of Headboard(A) as shown.
Step 3 Attach Headboard Support Rail(G) to Right Headboard Foot(E) and Left Headboard Foot(F) using Bolts(③) with Allen Key(⑩). Step 4 Place the Side Rail(B&C) face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Attach the first and fifth mounting position of Straight Connector(O) to Side Rail(B) and Side Rail(C) using Bolts(①) Allen Key(⑪). Repeat same step to assemble remaining Side Rail(B&C).
Align the mounting position of Side Cleat(H) and Center Side Cleat(I) to Side Rail(B) and Side Rail(C). Attach Side Cleat(H) and Center Side Cleat(I) to Side Rail(B) and Side Rail(C) using Bolts(②) with Allen Key(⑩). Repeat same step to attach Side Cleat(H) and Center Side Cleat(I) to remaining Side Rail(B&C). Note: After assembling, the mounting positions should face upside. Step 6 Attach Z-shaped Support Leg(Q) to assembled Side Rail Frame(B&C) using using Bolts(③) with Allen Key(⑩).
Step 8 Align the mounting position of Straight Connector(O) on assemble Side Rail Frame to Right Headboard Foot(E). Attach Straight Connector(O) on assemble Side Rail Frame to Right Headboard Foot(E) using Bolts(④), Spring Washers(⑧) and Washers(⑨) with Allen Key(⑪). Repeat same step to assemble the other Side Rail Frame to Left Headboard Foot(F). Step 9 Align the mounting position of Straight Connector(O) on assemble Side Rail Frame to Footboard(D).
Step 10 Attach Center Support Leg(L) to Center Support(N) by tightening using Bolts(③) with Allen Key(⑩) as shown. Step 11 Align two Center Support(N) together with U-shaped Support Leg(P). Attach U-shaped Support Leg(P) to Center Support(N) by tightening using Bolts(③) with Allen Key(⑩) as shown.
Attach Center Support(N) to Headboard Support Rail(G) and Footboard(D) using Bolts(⑦) with Allen Key(⑩). Note: After assembling Center Support(N), the mounting positions of them facing upside. Step 13 Attach Cross Center Support Rail(K) to Center Side Cleat(I) using Bolts(⑦) with Allen Key(⑩). Step 14 Attach Side Slat Plug(⑫) and Center Slat Plug(⑬) to Slat(M) as pix shown. Repeat same step to assemble remaining Slat(M).
Step 15 Now tighten all Bolts fully at all joints in a sequential manner. Then, align assembled Slat(M) to the mounting position of Side Cleat(H), Center Side Cleat(I) and Center Support(N) by pressing with hands. Note: If necessary, tap assemble slat to ensure it is fully slotted into position. Step 16 Now tighten all Bolts fully at all joints in a sequential manner. Your Bed is ready for use.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables to make informed decisions about their exposures to these chemicals.